Home   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Using The ISSN (International Serial Standard Number) as URN (Uniform Resource Names) within an ISSN-URN Namespace :: RFC3044








Network Working Group                                       S. Rozenfeld
Request for Comments: 3044                     ISSN International Centre
Category: Informational                                     January 2001


       Using The ISSN (International Serial Standard Number) as
       URN (Uniform Resource Names) within an ISSN-URN Namespace

Status of this Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2001).  All Rights Reserved.

Abstract

   This document presents how the ISSN - International Standard Serial
   Number - which is a persistent number for unique identification of
   serials widely recognised and used in the bibliographic world, can be
   supported within the Uniform Resource Name (URN) framework as a
   specific URN namespace identifier.

   An ISSN URN resolution system using the ISSN identifier as Uniform
   resource Name within an ISN URN Namespace has been developed by the
   ISSN International Centre (ISSN-IC) and is operating as a
   demonstrator to evaluate all requirements to deploy it in an
   operational environment.

   This proceeds from concepts and proposals developed in several IETF
   RFCs emphasising the way to implement and to use "recognised"
   existing numbering system within the URN framework (RFC 2248, RFC
   2141, RFC 2611).















Rozenfeld                    Informational                      [Page 1]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


Table of Contents

   1. Introduction ..................................................  2
   2. The ISSN system ...............................................  3
     2.1 The ISSN code ..............................................  3
     2.2  Construction of ISSN ......................................  3
     2.3 The ISSN Bibliographic record ..............................  4
     2.4 The ISSN Network ...........................................  4
     2.5 The ISSN Register ..........................................  5
   3. The ISSN and URN ..............................................  5
     3.1 compatibility ..............................................  5
     3.2 identification and access ..................................  7
   4  Resolution ....................................................  7
     4.1 Overview of the ISSN URN Resolution system .................  8
     4.2 Global Resolution ..........................................  9
   5. Registration of an ISSN URN Namespace ......................... 10
   6. Security Considersations ...................................... 13
   7. References .................................................... 13
   8. Contact information and useful links .......................... 14
   9. Full Copyright Statement ...................................... 15

1. Introduction

   The ISSN International Centre has undertaken in 1999-2000 an URN
   implementation taking advantage of the functional compatibility
   between the ISSN and the URN.

   The present implementation at the ISSN-IC Centre based on IETF RFCs
   on URN includes a centralised resolution system which allows direct
   access to electronic resources by using the ISSN identifiers as
   Uniform Resource Names within an ISSN URN Namespace.

   It demonstrates that the URN can integrate existing identifiers from
   well established identification schemes used by the bibliographic
   community.

   Nevertheless, to deploy this demonstrator into a wider operational
   system a responsible body or infrastructure is needed to assign
   namespaces and manage an RDS/NAPTR global resolution framework.  It
   is intended here that serials refer to all forms of serials published
   in printed form as well as in form of electronic resources.  Since
   this document contains a Registration form for an ISSN URN Namespace,
   this form also includes some paragraphs already present in other
   parts of this document.

   All figures and descriptions are dated 13 July 2000.





Rozenfeld                    Informational                      [Page 2]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


2. The ISSN system

   The ISSN system results from a joint UNESCO and ICSU-AB working group
   on bibliographic descriptions set up in 1967 in order to establish a
   world registry of serial titles currently issued, stored or archived.

   Today, the ISSN system which is defined by an International standard
   (ISO 3297), relies on two main data elements:

   The International Standard Serial Number which is a unique identifier
   for a specific serial publication.

   The key-title, which is a unique name assigned to a serial, and is
   inseparably linked with its ISSN.

   And on a well established framework: the ISSN International network.

2.1 The ISSN code

   The ISSN - International Standard Serials Number is defined in the
   ISO standard 3297:1998 as a code for the unique identification of
   serials.

   This standard states that:

   Each ISSN is a unique identifier for a specific serial publication.
   ISSN are applicable to the entire population of serials, whether
   past, present or to be published in the foreseeable future, whatever
   the medium of publication.

   Serials include periodicals, newspapers, annuals (such as reports,
   yearbooks, directories, etc.), and the journals, series, memoirs,
   proceedings, transactions, etc., of societies.

   Today, ISSN are assigned to data bases and electronic serial
   resources.  Further broadening of the scope to continuing resources
   is under discussion.

2.2 Construction of ISSN

   The ISO 3297 standard states that:

   An ISSN consists of eight digits in arabic numerals 0 to 9, except
   the last digit which is a check digit and can be sometimes an X.  The
   ISSN has no internal meaningful elements to identify language,
   country, publisher [or medium.]





Rozenfeld                    Informational                      [Page 3]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


   The check digit is always located in the extreme right position and
   is calculated on a modulus 11 basis with weights 8 to 2, using X in
   lieu of 10 where 10 would occur as a check digit.

   Each ISSN is inseparably linked a "the key title".  The Key title is
   a form of the title which is constructed in order to avoid duplicates
   so that each key title is unique in the ISSN Data base also named the
   ISSN Register.  ISSN and key titles are equivalent, they both
   identify without ambiguity a same serial.

   When printed or displayed the ISSN is preceded by the ISSN prefix and
   a space, and shall appear as two groups of four digits separated by a
   hyphen.

   examples  ISSN 0000-0019   ISSN 1560-1560

   ISSN are constructed and distributed by the ISSN International Centre
   to National Centres for assignment.

2.3 The ISSN Bibliographic record

   It contains in addition to the ISSN and key-title some thirty
   bibliographic data elements enabling the unambiguous and secure
   identification of a serial.

   One characteristic of an ISSN bibliographic record is that it
   contains other ISSN in linking fields in order to establish
   relationships between the given serial and a set of other related
   serials already identified.

   To recognise and to allow access to serial resources in digital form,
   the ISSN format has included additional data elements:

   -  A medium code which indicates the medium of the given serial
   -  A linking field to express relations between the different forms
      of "equivalent" serials on different media (from printed version
      to online as well as from online to printed)
   -  The location of an electronic resource: the URLs of a given
      resource.

2.4 The ISSN network

   It is the operational structure, main functions of which are:

   -  collecting the material which needs to be identified
   -  assigning the ISSN and the key title to a serial for unambiguous
      identification
   -  creating and editing bibliographic records in ISSN format



Rozenfeld                    Informational                      [Page 4]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


   -  making available the bibliographic records

   It consists of:

   -  National Centres - 69 centres - responsible for the identification
      of serials published in their respective countries.
      Records created by National Centres are transmitted to the ISSN-IC
      for validation and update of the ISSN Register.

   -  The International Centre which co-ordinates the network and acts
      as a National Centre for serials published by International
      institutions and by countries with no National Centre.
      It collects and checks all bibliographic records to update in a
      consistent way the ISSN Register.

      It maintains the ISSN Register and makes it available.

2.5 The ISSN Register

   It is a data base controlled and maintained by the ISSN-IC.  It
   consists in 970 000 bibliographic records stored in ISSN-MARC format
   (a subset of USMARC format ) which are available on different media
   (CD-ROM, DAT, and on the Internet).

3. THE ISSN AND URN

3.1 ISSN compliance with URN requirements

   The different specifications and requirements on URNs have been
   studied from the following documents:

   URN Syntax
   (RFC 2141, May 1997 - R. Moats)

   Using Existing Bibliographic Identifiers as Uniform Resource Names
   (RFC 2288 February 1998 - C. Lynch, R. Daniel)

   Functional Requirements for Uniform Resource Names
   (RFC 1737, December 1994 - K. Sollins, L. Masinter)

   URN Namespace Definition Mechanisms
   (RFC 2611, June 1999 - L. Daigle, R. Iannella)

   A URN Namespace for IETF Documents
   (RFC 2648, August 1999 - R. Moats)

   Requirements for URNs' functional capabilities (from RFC 1737)




Rozenfeld                    Informational                      [Page 5]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


   Global scope: A URN is a name with global scope which does not imply
   a location.  It has the same meaning everywhere.

   -  Applicable for ISSN.  Accordingly to ISO standard 3297 there is no
      limitations for serial resource identification.

   Global uniqueness: The same URN will never be assigned to two
   different resources.

   -  Applicable for ISSN.  By definition an ISSN is assigned to one and
      only one serial resource.  Once assigned, an ISSN is never re-
      assigned.

   Persistence: The lifetime of a URN is permanent.

   -  Applicable for ISSN.  All ISSN are registered in the ISSN Register
      data base which covers current serial resources as well as ceased.

   Scalability: URNs can be assigned to any resource that might
   conceivably be available on the network, for hundreds of years.

   -  Applicable for ISSN.  More than 98500000 ISSN have yet been
      assigned.

   Legacy support: The scheme must permit the support of existing legacy
   naming systems.

   -  Applicable for ISSN.  By definition the ISSN system is a legacy
      identification system for serial resources.

   Independence: It is solely the responsibility of a name issuing
   authority to determine the conditions under which it will issue a
   name.

   -  Applicable for ISSN.  By definition of the ISSN system.

   Resolution: For URNs that have corresponding URLs, there must be some
   feasible mechanism to translate a URN to a URL.

   -  Applicable for ISSN.  The ISSN-IC has developed an ISSN URN
      resolver which translates one given ISSN into one or several URLs.

   In addition to these basic requirements on the functional elements of
   the URNs, there are other requirements for how they are encoded in a
   string:

   Single encoding, Simple comparison, Simple human transcribability,
   Transport friendliness, Machine consumption, Text recognition.



Rozenfeld                    Informational                      [Page 6]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


   -  Applicable to ISSN.  As defined in the ISO standard the ISSN is a
      very simple and short character string which fully responds to
      those requirements.

   Considering the aim of the ISSN, its framework and new developments
   for electronic serial resources identification, we can state that the
   ISSN fulfills all expressed URN requirements.

   Syntax requirements

   Considering syntax requirements (RFC2141) for an URN namespace and
   the URN syntax, an ISSN based URN namespace is compliant with such
   requirements since it does not use any reserved characters.

   In RFC 2288 (4.2 Encoding Considerations and Lexical Equivalence) it
   is stated that:

   There is no problem representing ISSN in the namespace - specific
   string of URNs since all characters valid in the ISSN are valid in
   the namespace-specific URN string, and %-encoding is never required.

   Example: urn:ISSN:1046-8188

   Supplementary comparison rules are also appropriate for the ISSN
   namespace, hyphens should be dropped prior to comparison and
   occurrences of 'x' normalised to uppercase.

3.2 Identification and access

   The role of an URN is also to provide safe access to the
   characteristics of a resource and to the resource itself.  One may
   view an ISSN bibliographic record as a metadata since it contains
   different data information on the resource which is to be identified,
   described, located and/or accessed.

   The ISSN is widely used as an identification number for serial
   resources.  Since the ISSN Network provides the URLs corresponding to
   the identified resources the ISSN is now also a tool for the location
   and access to resources on the Internet.  This is achieved by an ISSN
   URN resolution system.

4. RESOLUTION

   The different specifications and requirements on URN resolution have
   been studied from the following documents:

   URI Resolution Services Necessary for URN Resolution
   (RFC 2483, January 1999 - M. Mealling)



Rozenfeld                    Informational                      [Page 7]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


   Resolution of Uniform Resource Identifiers using the Domain Name
   System
   (RFC 2168 June 1997 - R. Daniel, M. Mealling )

   Architectural Principles of Uniform Resource Name Resolution
   (RFC 2276, January 1998 - K. Sollins )

4.1. Overview of the ISSN URN Resolution system

   Using ISSN as Uniform Resource Name implies that some mapping
   mechanism is provided to ensure a reliable access to available
   resources when using Internet tools like a standard Web browser.

   From the technical point of view this has led to develop within our
   system the different pieces of software and services required to
   fulfill such aim.

   The resolution software be able to translate a given ISSN-URN into
   electronic locations:

   -  location of the bibliographic description or metadata
   -  location of the periodical itself (if it is in electronic form).

   These electronic locations are expressed in form of URLs for which
   persistence is not ensured.  As a consequence the URLs which are
   stored for resolution have to be checked and updated to ensure
   relevant mapping with the corresponding URNs.

   The URLs which are stored in the database must be checked regularly
   for accuracy and if changes occur they have to be reported in the
   ISSN-URN resolver database.

   The browser has to include the URN facility which allows to express
   the location of a given resource in form of an ISSN, this means that
   if the standard browsers do not include the URN option a "plug-in" is
   to be developed.

   Thus, four types of developments have been considered:

   Design and implementation of a resolver:

   -  In a first step a global centralised resolution system has been
      developed and implemented on one resolution server located at the
      ISSN International Centre.

   It ensures effective mapping between a given ISSN and one or several
   URL(s) which implies that "multiple resolution" is performed by
   design and implementation of an ISSN-URL mapping file.



Rozenfeld                    Informational                      [Page 8]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


   -  Today, the principal method to map ISSN with URLs is to extract
      them from ISSN registered records and to store them in a separate
      file structured specially for the resolution process.  Besides,
      other ways to get URLs for bibliographic resources identified by
      ISSN are tested.  Management data as well as attributes are linked
      to URLs in order to recognise objects handled by the resolver.

   Design and implementation of an URL checker:

   -  In order to control the persistence and the accessibility to
      ISSN-URN a robot called the "URL Watcher" has been written to
      control the status of all URLs stored in the ISSN-URL mapping
      file.  Broken or redirected URLs are detected and stored to permit
      efficient resolution.

   Design and implementation of a browser plug-in:

   -  The existing browsers do not include today the URN "protocol"
      functionality.  One expect to have it implemented in a near
      future.  A plug-in for Netscape communicator and MS-Explorer has
      been developed and is available.

   This enables to enter directly the ISSN preceded by the string
   "urn:ISSN:" in the browsers address box instead of typing the URL and
   as result to get displayed the bibliographic record or/and the online
   resource.  Clicking on an ISSN on an HTML page gives the same result.

      example: urn:ISSN:1560-1560

4.2 Global resolution

   Since the ISSN system is not addressing a local environment (like a
   given Library) and is expected to be linked to other URNs (or other
   identification services) for identification of serial related
   resources having other levels of granularity, we have to consider an
   evolution of the present resolution implementation to a global
   resolution system.

   Resolution and especially global resolution is considered as a major
   issue for becoming an ISSN URN Namespace.

   This is expressed in the following statement (from RFC 2611, "URN
   Namespace Definition Mechanisms"):








Rozenfeld                    Informational                      [Page 9]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


   Process for identifier resolution:

      If a namespace is intended to be accessible for global resolution,
      it must be registered in an RDS (Resolution Discovery System, see
      [RFC2276]) such as NAPTR.  Resolution then proceeds according to
      standard URI resolution processes, and the mechanisms of the RDS.

   Our present views and evaluations to be integrated in such RDS System
   for global resolution for an ISSN URN Namespace are mainly based on
   concepts and proposals from the following RFCs:

   RFC 2276 for RDS architecture for global resolution,
   RFC 2168 for the NAPTR DNS extension,

   From a technical point of view our present resolution system is
   flexible enough to take place in a RDS/NAPTR resolution framework.

5. Namespace registration

   Namespace ID:

      ISSN

   Registration Information:

      Version 1
      Date: 2000-08-28

   Declared registrant of the namespace:

      Name:         S. ROZENFELD (Mr.)

      E-mail:       rozenfeld@issn.org

      Affiliation:  ISSN International Centre

      Address: 20, rue Bachaumont
                      75002 PARIS
                           FRANCE

   Declaration of syntactic structure:

   In accordance with the ISO standard 3297 - Information and
   documentation International Standard Serial Number(ISSN)-(1998)







Rozenfeld                    Informational                     [Page 10]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


   The ISSN consists of eight digits in Arabic numerals 0 to 9, except
   the last digit which is a check digit and can sometimes be an X.  The
   ISSN has no internal meaningful elements to identify language,
   country, publisher.

   The check digit is always located in the extreme right position and
   is calculated on a modulus 11 basis with weights 8 to 2, using X in
   lieu of 10 where 10 would occur as a check digit.

   Each ISSN is inseparably linked to the serials title "the key title"
   which is a constructed form of the title in order to avoid duplicates
   so that each key title is unique within the ISSN Data base.  ISSN and
   key titles are equivalent, they both identify without ambiguity a
   same serial.

   When printed or displayed the ISSN is preceded by the ISSN prefix and
   a space, and shall appear as two groups of four digits separated by a
   hyphen

      Therefore the ISSN structure is as follows:

         NNNN-NNNC

          where N is a Digit character [0..9]
                C is either a Digit character or letter "X" [0..9,X]
                C is the check character

      An ISSN URN Namespace structure is conformant to URN syntax
      requirements (RFC 2141).

         examples urn:ISSN:0259-000X
                  urn:ISSN:1560-1560

      Relevant ancillary documentation:

         ISO 3279 Information and documentation - International
         Standard Serial Number (ISSN)

         The ISSN: an identifier for serials in digital form.
         Compatibility with the URN framework.
         (ISSN International Centre -  January 1999)

         The ISSN-URN project.
         (ISSN International Centre -  October 1999)

   Identifier uniqueness considerations:

      Uniqueness is guaranteed by ISSN definition.



Rozenfeld                    Informational                     [Page 11]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


      As defined in the ISO 3279 each ISSN is a "unique" identifier for
      a specific serial publication.

      A different ISSN is assigned to each publication issued on
      different media.

      An ISSN is never re-assigned.

   Identifier persistence considerations:

      Persistence of ISSN is guaranteed by the maintenance and update of
      the ISSN Register by the ISSN Centres.
      Even records for "ceased" publications still remain in the ISSN
      database, and links between serials belonging to a same "family"
      are expressed with related ISSN within the records.  This linking
      mechanism extends the current Identifier persistence concept.

   Process of identifier assignment:

      The ISSN network consisting in 68 National Centres and the
      International Centre:

      -  collects the material to be identified
      -  checks for identification all types of serials including
         electronic serial resources.
      -  assigns an ISSN to each different periodical.
      -  establish the bibliographic record.
      -  makes available the data.

      The data consisting in bibliographic records is centralised at the
      ISSN International Centre for global uniqueness checking.
      A given ISSN refers to one and only one form of the title, he
      key-title which is a key element of the bibliographic record as
      well as the ISSN.

      Today, the ISSN database contains more than 950 000 bibliographic
      records and a special attention is given to electronic publication
      resources and related metadata, and the way to access them.

   Process for identifier resolution:

      As a first step the ISSN International Centre has developed a
      centralised ISSN-URN resolver with multiple resolution
      capabilities which runs as a demonstrator.

      In a second step we expect the ISSN Namespace to be accessible for
      global resolution and to provide a set of resolution services
      compliant with the RDS/NAPTR proposals.



Rozenfeld                    Informational                     [Page 12]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


   Rules for Lexical Equivalence:

      The check digit if 'X' is case-sensitive.
      Thus, if "x" is found it must be translated in upper case.

      The hyphen between the 4th and the 5th digit can be omitted

   Conformance with URN Syntax:

      There are no characters reserved.

Security Considerations

   Because this namespace defines no additional reserved characters it
   does not add any security consideration.

   Validation mechanism:

      None specified today.

   Scope:

      Global.

6. Security Considerations

   Security issues are discussed in section 5.

7. References

   [1] ISO 3279 Information and documentation - International Standard
       Serial Number (ISSN)

   [2] The ISDS Manual - ISSN International Centre (Paris, 1983) (under
       revision)

   [3] Moats, R., "URN Syntax", RFC 2141, May 1997.

   [4] Sollins, K. and L. Masinter, "Functional Requirements for Uniform
       Resource Names", RFC 1737, December 1994.

   [5] Lynch, C., Preston, C. and R. Daniel, "Using Existing
       Bibliographic Identifiers as Uniform Resource Names", RFC 2288,
       February 1998.

   [6] Daniel, R. and M. Mealling, "Resolution of Uniform Resource
       Identifiers using the Domain Name System", RFC 2168, June 1997.




Rozenfeld                    Informational                     [Page 13]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


   [7] Sollins, D., "Architectural Principles of Uniform Resource Name
       Resolution", RFC 2276, January 1998.

8. Contact Information and useful links

   Slawek Rozenfeld (Mr.)
   Head, Computer Section
   ISSN International Centre
     20, rue Bachaumont
           750002 PARIS
                 FRANCE

   EMail: rozenfeld@issn.org
          issnic@issn.org

   ISSN Web site  http://www.issn.org
   ISSN-URN links http://www.issn.org/urn/


































Rozenfeld                    Informational                     [Page 14]

RFC 3044        ISSN as URN within an ISSN-URN Namespace    January 2001


9. Full Copyright Statement

   Copyright (C) The Internet Society (2001).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.



















Rozenfeld                    Informational                     [Page 15]


 

RFC, FYI, BCP