Network Working Group Chuck S. Kline CSK
Request for Comments: 460 UCLA
NIC 14415 13 February 73
NCP Survey
1 This RFC is the first in a series which will request information on
implementation of host to host protocol. We would appreciate a reply
to this RFC from all sites within two weeks. One convenient way to
reply is to make a copy of this RFC at the NIC and insert the replies
at the appropriate spots. The results of this survey will be
published. Please send replies to nic ident CSK or to
Charles Kline
Boelter Hall 3804
UCLA
405 Hilgard Ave.
Los Angeles, Cal. 90034
2 This particular RFC will deal with implementations of Network
Control Programs (NCPs). Future RFCs will deal with .
implementations of Telnet, RJE, etc.
3 In order to ask questions about NCPs and get meaningful replies, I
will here describe what I consider to be my concept of an NCP.
3a An NCP is that part of the system which performs the tasks
necessary for host to host protocol as specified by document NIC
7104 (protocols notebook).
3b NCPs contain the following parts (though not necessarily as
separate pieces):
3b1 Code which handles connection establishment including
maintenance of the rendezvous table (table of open and pending
connections).
3b2 Code which handles transmission over open connections
including buffer management and the sending of allocate and
giveback commands.
3b3 Code which handles the actual movement of messages in and
out of the Imp (sometimes called the Imp handler and sometimes
in a separate cpu).
3b4 Other code including measurements, initialization, etc.
Kline [Page 1]
RFC 460 NCP Survey February 1973
4. Please answer the following questions. It is probably appropriate
to give this survey to the coder of the NCP or other knowledgeable
person. Write na (not applicable) where it is appropriate. Circle
the number of the appropriate choice when a choice is required.
Thank you.
5 General Information
5a Host Name: ----
5b Site Number: ----
5c Your name ----
5d Main cpu is a ---- (360/75, PDP-10, B6700, etc.)
5e Operating system in main cpu is ---- (tenex, os/360, etc.)
5f Is documentation available on your NCP?
5f1 user level (how to use NCP)
5f2 system level (implementation)
5f3 Is the documentation available at the NIC?
6 Imp interface
6a built:
6a1 in house
6a2 contracted to ----
6b full or half duplex?
6c maximum bandwidth is ---- baud in each direction
7 Coding of NCP
7a ncp was written:
7a1 in house
7a1a written in ---- man-months
7a1b Name of person who wrote NCP ----
Kline [Page 2]
RFC 460 NCP Survey February 1973
7a1c debugged in ---- man-weeks
7a1d machine hours used in development and debugging of NCP
----
7a2 contracted to ----
7a2a contractor took ---- man-months
7a3 supplied another site without modification by this site
(specify site where NCP obtained from ------).
7a4 supplied from another site but modified by this site for
different system or for other reasons (specify site where NCP
obtained from ------)
7a4a modifications took ---- man-weeks
7b NCP is maintained:
7b1 in house (person's name ----)
7b2 by another site (specify site ----)
7c Size of NCP code:
7c1 Total size of all NCP code (not tables or buffers) as
described above
7c1a ---- words of ---- bits per word
7c2 size of code which initializes NCP (on system up or after
NCP or NET crash)
7c2a ---- words of ---- bits per word
7c3 size of code which handles opening and closing of
connections
7c3a ---- words of ---- bits per word
7c4 size of code which moves data from user process to Imp
handler or from Imp handler to user process
7c4a ---- words of ---- bits per word
Kline [Page 3]
RFC 460 NCP Survey February 1973
7c5 size of Imp handler code
7c5a ---- words of ---- bits per word
7c6 size of other code (explain what it is)
7c6a ---- words of ---- bits per word
7d Size of NCP tables:
7d1 size of tables indexed by open connection (i.e. tables for
control of open connections)
7d1a ---- entries or ---- words per entry of ---- bits per
word
7d2 size of tables indexed by link (i.e. tables for link
management and for quick association of an input message with a
process)
7d2a ---- entries of ---- words per entry of ---- bits per
word
7d3 size of other tables (explain)
7d3a ---- entries of ---- words per entry of ---- bits per
word
8 Host-Imp communications
8a Imp handling is performed in
8a1 main cpu
8a2 additional processor (specify machine ----)
8b Imp handling is performed at:
8b1 interrupt level by resident code
8b2 scheduled process with resident code
8b3 scheduled process with swappable code
8c Number and size of buffers for the Imp handler (on input,
number of buffers for messages before cpu will stop taking bits
from imp. On output, number of buffers which may be queued before
user processes will be blocked waiting for a free buffer)
Kline [Page 4]
RFC 460 NCP Survey February 1973
8c1 ---- output buffers for sending to net of ---- words of
---- bits per word
8c2 ---- input buffers for receiving from net of ---- words of
---- bits per word
9 NCP-Imp handler communications
9a NCP communicates with Imp handler by
9a1 putting message on queue for handler and waking
(unblocking) handler (i.e. shared memory approach)
9a2 some other mechanism (explain)
10 NCP-User communication
10a Mechanism:
10a1 special mechanism for network (i.e. different than files)
using:
10a1a shared resident memory
10a1b shared non-resident (swappable memory or file)
10a1c other (explain)
10a2 similar to file io but network assigned rather than file
(i.e. transparent to user process coding)
10b Bytes sizes allowed (circle all)
10b1 1 bit
10b2 7 bit
10b3 8 bit
10b4 9 bit
10b5 16 bit
10b6 18 bit
10b7 24 bit
10b8 32 bit
Kline [Page 5]
RFC 460 NCP Survey February 1973
10b9 36 bit
10b10 other (explain)
11 Buffer space allocations
11a initial allocation when connection (receive) is opened
11a1 ---- messages and ---- bits
11b factors which will change this allocation
11b1 up
11b2 down
11c conditions which would cause a giveback command to be sent
12 Protocol facilities
12a Errors
12a1 Do you send error commands when you detect protocol
errors?
12a2 Do you log it (or take some other action) when you recieve
error commands?
12b Queuing
12b1 do you allow queuing of connections (i.e. when an rts or
str is received for which no request is pending, do you refuse
it (send back a cls) or queue it? also do you queue when two or
more requests match the same socket?)
12b1a yes always
12b1b no always
12b1c yes for listens
12b1d other (explain)
12c Are there hooks (code) in the NCP for:
12c1 NCP measurement
12c2 Network measurement
Kline [Page 6]
RFC 460 NCP Survey February 1973
12c3 MSP and other protocol experiments
12c4 Do any of these hooks allow a user process to send a
message with a given leader or look at all messages which
arrive with a given leader?
13 Time outs
13a How long will the NCP hold a request for connection (INIT or
LISTEN) from a user process before timing out if not matched by an
RTS or STR from the net ----
13b How long will the NCP hold an STR or RTS recieved from the net
before timing out and sending a CLS ----
13c How long will the NCP wait after sending a reset or echo
command before declaring the host dead (assuming you got a RFNM at
least) ----
13d Any other timeouts? (explain)
14 Have you made any measurements on the effect of network use on
your system?
14a effect of local users using telnet to go out to net
14b effect of foreign users using your system via net
14c bandwidth you have been able to achieve
15 Are any changes planned or in progress in the design or coding of
your NCP? (explain)
16 Other Comments
16a Please feel free to add other comments on your NCP which you
feel would be of interest to the network community.
[ This RFC was put into machine readable form for entry ]
[ into the online RFC archives by Grant Bowman 11/97 ]
Kline [Page 7]
RFC, FYI, BCP