Home   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

CIP Transport Protocols :: RFC2653








Network Working Group                                          J. Allen
Request for Comments: 2653                         WebTV Networks, Inc.
Category: Standards Track                                      P. Leach
                                                              Microsoft
                                                             R. Hedberg
                                                              Catalogix
                                                            August 1999


                        CIP Transport Protocols

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (1999).  All Rights Reserved.

Abstract

   This document specifies three protocols for transporting CIP
   requests, responses and index objects, utilizing TCP, mail, and HTTP.
   The objects themselves are defined in [CIP-MIME] and the overall CIP
   architecture is defined in [CIP-ARCH].

1.   Protocol

   In this section, the actual protocol for transmitting CIP index
   objects and maintaining the mesh is presented. While companion
   documents ([CIP-ARCH] and [CIP-MIME]) describe the concepts involved
   and the formats of the CIP MIME objects, this document is the
   authoritative definition of the message formats and transfer
   mechanisms of CIP used over TCP, HTTP and mail.

1.1  Philosophy

   The philosophy of the CIP protocol design is one of building-block
   design. Instead of relying on bulky protocol definition tools, or
   ad-hoc text encodings, CIP draws on existing, well understood
   Internet technologies like MIME, RFC-822, Whois++, FTP, and SMTP.
   Hopefully this will serve to ease implementation and consensus





Allen, et al.               Standards Track                     [Page 1]

RFC 2653                CIP Transport Protocols              August 1999


   building. It should also stand as an example of a simple way to
   leverage existing Internet technologies to easily implement new
   application-level services.

1.2  Conventions

   The key words "MUST" and "MAY" in this document are to be interpreted
   as described in "Key words for use in RFCs to Indicate Requirement
   Levels" [KEYWORDS].

   Formal syntax is defined using ABNF [ABNF].

   In examples octets sent by the sender-CIP are preceded by ">>> " and
   those sent by the receiver-CIP by "<<< ".

2  MIME message exchange mechanisms

   CIP relies on interchange of standard MIME messages for all requests
   and replies. These messages are passed over a bidirectional, reliable
   transport system. This document defines transport over reliable
   network streams (via TCP), via HTTP, and via the Internet mail
   infrastructure.

   The CIP server which initiates the connection (conventionally
   referred to as a client) will be referred to below as the sender-CIP.
   The CIP server which accepts a sender-CIP's incoming connection and
   responds to the sender-CIP's requests is called a receiver-CIP.

2.1  The Stream Transport

   CIP messages are transmitted over bi-directional TCP connections via
   a simple text protocol. The transaction can take place over any TCP
   port, as specified by the mesh configuration. There is no "well known
   port" for CIP transactions. All configuration information in the
   system must include both a hostname and a port.

   All sender-CIP actions (including requests, connection initiation,
   and connection finalization) are acknowledged by the receiver-CIP
   with a response code. See section 2.1.1 for the format of these
   codes, a list of the responses a CIP server may generate, and the
   expected sender-CIP action for each.

   In order to maintain backwards compatibility with existing Whois++
   servers, CIPv3 sender-CIPs MUST first verify that the newer protocol
   is supported. They do this by sending the following illegal Whois++
   system command: "# CIP-Version: 3". On existing Whois++
   servers implementing version 1 and 2 of CIP, this results in a 500-
   series response code, and the server terminates the connection.  If



Allen, et al.               Standards Track                     [Page 2]

RFC 2653                CIP Transport Protocols              August 1999


   the server implements CIPv3, it MUST instead respond with response
   code 300. Future versions of CIP can be correctly negotiated using
   this technique with a different string (i.e. "CIP-Version: 4"). An
   example of this short interchange is given below.

   Note: If a sender-CIP can safely assume that the server implements
   CIPv3, it may choose to send the "# CIP-Version: 3" string and
   immediately follow it with the CIPv3 request. This optimization,
   useful only in known homogeneous CIPv3 meshes, avoids waiting for the
   roundtrip inherent in the negotiation.

   Once a sender-CIP has successfully verified that the server supports
   CIPv3 requests, it can send the request, formatted as a MIME message
   with Mime-Version and Content-Type headers (only), using the network
   standard line ending: "".

   Cip-Req        = Req-Hdrs CRLF Req-Body

   Req-Hdrs       = *( Version-Hdr | Req-Cntnt-Hdr )
   Req-Body       = Body     ; format of request body as in [CIP-MIME]

   Body           = Data CRLF "." CRLF
   Data           =          ; data with CRLF "." CRLF replaced by
                             ; CRLF ".." CRLF

   Version-Hdr    = "Mime-Version:" "1.0" CRLF
   Req-Cntnt-Hdr  = "Content-Type:" Req-Content CRLF
   Req-Content    =          ; format is specified in [CIP-MIME]

   Cip-Rsp        = Rsp-Code CRLF [ Rsp-Hdrs CRLF Rsp-Body ]
                     [ Indx-Cntnt-Hdr CRLF Index-Body ]
   Rsp-Code       = DIGIT DIGIT DIGIT Comment
   Comment        =          ; any chars except CR and LF
   Rsp-Hdrs       = *( Version-Hdr | Rsp-Cntnt-Hdr )
   Rsp-Cntnt-Hdr  = "Content-Type:" Rsp-Content CRLF
   Rsp-Content    =          ; format is specified in [CIP-MIME]
   Rsp-Body       = Body     ; format of response body as in [CIP-MIME]

   Indx-Cntnt-Hdr = "Content-Type:" Indx-Obj-Type CRLF
   Indx-Obj-Type  =          ; any registered index object's MIME-type
                             ; the format is specified in [RFC2045]
   Index-Body     = Body     ; format defined in each index
                             ; specifications

   CRLF           =  CR LF   ; Internet standard newline
   CR             =  %x0D    ; carriage return
   LF             =  %x0A    ; linefeed
   DIGIT          =  %x30-39



Allen, et al.               Standards Track                     [Page 3]

RFC 2653                CIP Transport Protocols              August 1999


   The message is terminated using SMTP-style message termination. The
   data is sent octet-for-octet, except when the pattern
   1*["."] is seen, in which case one more period is
   added.

   When the data is finished, the octet pattern "." is
   transmitted to the receiver-CIP.

   On the receiver-CIP's side, the reverse transformation is applied,
   and the message read consists of all bytes up to, but not including,
   the terminating pattern.

   In response to the request, the receiver-CIP sends a response code,
   from either the 200, 400, or 500 series. The receiver-CIP then
   processes the request and replies, if necessary, with a MIME message.
   This reply is also delimited by an SMTP-style message terminator.

   After responding with a response code, the receiver-CIP MUST prepare
   to read another request message, resetting state to the point when
   the sender-CIP has just verified the CIP version. If the sender-CIP
   is finished making requests, it may close the connection. In response
   the receiver-CIP MUST abort reading the message and prepare for a new
   sender-CIP connection (resetting its state completely).

   An example is given below. It is again worth reiterating that the
   command format is defined in [CIP-MIME] whereas the message body is
   defined in each index object definition. In this example the index
   object definition in [CIP-TIO] will be used. Line endings are
   explicitly shown in anglebrackets; newlines in this text are added
   only for readability. Comments occur in curly-brackets.

      { sender-CIP connects to receiver-CIP }
   <<< % 220 Example CIP server ready
   >>> # CIP-Version: 3
   <<< % 300 CIPv3 OK!
   >>> Mime-Version: 1.0
   >>> Content-type: application/index.cmd.datachanged; type=
   >>> x-tagged-index-1; dsi=1.2.752.17.5.10
   >>> 
   >>> updatetype: incremental tagbased
   >>> thisupdate: 855938804
   >>> lastupdate: 855940000
   >>> .
   <<< % 200 Good MIME message received
   >>> MIME-Version: 1.0
   >>> Content-Type: application/index.obj.tagged;
   >>> dsi=1.2.752.17.5.10;
   >>> base-uri="ldap://ldap.umu.se/dc=umu,dc=se"



Allen, et al.               Standards Track                     [Page 4]

RFC 2653                CIP Transport Protocols              August 1999


   >>> 
   >>> version: x-tagged-index-1
   >>> updatetype: incremental
   >>> lastupdate: 855940000
   >>> thisupdate: 855938804
   >>> BEGIN IO-schema
   >>> cn: TOKEN
   >>> sn: FULL
   >>> title: FULL
   >>> END IO-Schema
   >>> BEGIN Update Block
   >>> BEGIN Old
   >>> title: 3/testpilot
   >>> END Old
   >>> BEGIN New
   >>> title: 3/chiefpilot
   >>> END New
   >>> END Update Block
   >>> .
   <<< % 200 Good MIME message received
      { Sender-CIP shuts down socket for writing }
   <<< % 222 Connection closing in response to sender-CIP shutdown
      { receiver-CIP closes its side, resets, and awaits a
        new sender-CIP }

   An example of an unsuccessful version negotiation looks like this:

      { sender-CIP connects to receiver-CIP }
   <<< % 220 Whois++ server ready
   >>> # CIP-Version: 3
   <<< % 500 Syntax error
      { server closes connection }

   The sender-CIP may attempt to retry using version 1 or 2 protocol.
   Sender-CIP may cache results of this unsuccessful negotiation to
   avoid later attempts.

2.1.1     Transport specific response codes

   The following response codes are used with the stream transport:

   Code  Suggested description     Sender-CIP action
         text

   200   MIME request received     Expect no output, continue session
         and processed             (or close)





Allen, et al.               Standards Track                     [Page 5]

RFC 2653                CIP Transport Protocols              August 1999


   201   MIME request received     Read a response, delimited by SMTP-
         and processed, output     style message delimiter.
         follows

   220   Initial server banner     Continue with Whois++ interaction,
         message                   or attempt CIP version negotiation.

   222   Connection closing (in    Done with transaction.
         response to sender-CIP
         close)

   300   Requested CIP version     Continue with CIP transaction, in
         accepted                  the specified version.

   400   Temporarily unable to     Retry at a later time. May be used
         process request           to indicate that the server does not
                                   currently have the resources
                                   available to accept an index.

   500   Bad MIME message format   Retry with correctly formatted MIME

   501   Unknown or missing        Retry with correct CIP command
         request in
         application/index.cmd

   502   Request is missing        Retry with correct CIP attributes.
         required CIP attributes

   520   Aborting connection for   Alert local administrator.
         some unexpected reason

   530   Request requires valid    Sign the request, if possible, and
         signature                 retry. Otherwise, report problem to
                                   the administrator.

   531   Request has invalid       Report problem to the administrator.
         signature

   532   Cannot check signature    Alert local administrator, who should
                                   cooperate with remote administrator
                                   tp diagnose and resolve the problem.
                                   (Probably missing a public key.)









Allen, et al.               Standards Track                     [Page 6]

RFC 2653                CIP Transport Protocols              August 1999


2.2  Internet mail infrastructure as transport

   As an alternative to TCP streams, CIP transactions can take place
   over the existing Internet mail infrastructure. There are two
   motivations for this feature of CIP. First, it lowers the barriers to
   entry for leaf servers. When the need for a full TCP implementation
   is relaxed, leaf nodes (which, by definition, only send index
   objects) can consist of as little as a database and an indexing
   program (possibly written in a very high level language) to
   participate in the mesh.

   Second, it keeps with the philosophy of making use of existing
   Internet technology. The MIME messages used for requests and
   responses are, by definition of the MIME specification, suitable for
   transport via the Internet mail infrastructure. With a few simple
   rules, we open up an entirely different way to interact with CIP
   servers which choose to implement this transport. See Protocol
   Conformance, below, for details on what options server implementers
   have about supporting the various transports.

   The basic rhythm of request/response is maintained when using the
   mail transport. The following sections clarify some special cases
   which need to be considered for mail transport of CIP objects. In
   general, all mail protocols and mail format specifications
   (especially MIME Security Multiparts) can be used with the CIP mail
   transport.

2.2.1     CIP-Version negotiation

   Since no information on which CIP-version is in use is present in the
   MIME message, this information has to be carried in the mailheader.
   Therefore CIP requests sent using the mail transport MUST include a
   CIP-version headerline, to be registered according to [MHREG].
   The format of this line is:

   DIGIT       =  %x30-39
   number      =  1*DIGIT
   cipversion  =  "CIP-Version:"  number["." number]

2.2.2     Return path

   When CIP transactions take place over a bidirectional stream, the
   return path for errors and results is implicit. Using mail as a
   transport introduces difficulties to the recipient, because it's not
   always clear from the headers exactly where the reply should go,
   though in practice there are some heuristics used by MUA's.





Allen, et al.               Standards Track                     [Page 7]

RFC 2653                CIP Transport Protocols              August 1999


   CIP solves this problem by fiat. CIP requests sent using the mail
   transport MUST include a Reply-To header as specified by RFC-822.
   Any mail received for processing by a CIP server implementing the
   mail transport without a Reply-To header MUST be ignored, and a
   message should be logged for the local administrator. The receiver
   MUST not attempt to reply with an error to any address derived from
   the incoming mail.

   If there are no circumstances under which a response is to be sent to
   a CIP request, the sender should include a Reply-To header with the
   address "<>" in it.  Receivers MUST never attempt to  send replies to
   that address, as it is defined to be invalid (both here, and by the
   BNF grammar in RFC-822). It should be noted that, in general, it is a
   bad idea to turn off error reporting in this way. However, in the
   simplest case of an index pushing program, this MAY be a desirable
   simplification.

2.3  HTTP transport

   HTTP MAY also be used to transport CIP objects, since they are just
   MIME objects. A transaction is performed by using the POST method to
   send an application/index.cmd and returning an
   application/index.response or an application/index.obj in the HTTP
   reply. The URL that is the target of the post is a configuration
   parameter of the CIP-sender to CIP-receiver relationship.

   Example:

      { the client opens the connection and sends a POST }
   >>> POST / HTTP/1.1
   >>> Host: cip.some.corp
   >>> Content-type: application/index.cmd.noop
   >>> Date: Thu, 6 Jun 1997 18:16:03 GMT
   >>> Content-Length: 2
   >>> Connection: close
   >>> 
      { the server processes the request }
   <<< HTTP/1.1 204 No Content
      { the server closes the connection }

   In addition to leveraging the security capabilities that come with
   HTTP, there are other HTTP features that MAY be useful in a CIP
   context. A CIP client MAY use the Accept-Charset and Accept-Language
   HTTP headers to express a desire to retrieve an index in a particular
   character set or natural language. It MAY use the Accept-Encoding
   header to (e.g.) indicate that it can handle compressed responses,
   which the CIP server MAY send in conjunction with the Transfer-
   Encoding header. It MAY use the If-Modified-Since header to prevent



Allen, et al.               Standards Track                     [Page 8]

RFC 2653                CIP Transport Protocols              August 1999


   wasted transmission of an index that has not changed since the last
   poll. A CIP server can use the Retry-After header to request that the
   client retry later when the server is less busy.

3.   Security Considerations

   There are two levels at which the index information can be protected;
   the first is by use of the technology available for securing MIME
   [MIME-SEC] objects, and secondly by using the technology available
   for securing the transport.

   When it comes to transport the stream transport can be protected by
   the use of TLS [TLS] . For HTTP the Security is handled by using HTTP
   Basic Authentication [RFC 2616], HTTP Message Digest Authentication
   [RFC2617] or SSL/TLS. Extra protection for the SMTP exchange can be
   achieve by the use of Secure SMTP over TLS [SMTPTLS].

4.   References

   [RFC 2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part One: Format of Internet Message
              Bodies", RFC 2045, November 1996.

   [RFC 2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P. and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [RFC 2617] Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence, S.,
              Leach, P., Luotonen, A. and L. Stewart, "HTTP
              Authentication: Basic and Digest Access Authentication",
              RFC 2617, June 1999.

   [CIP-ARCH] Allen, J. and M. Mealling, "The Architecture of the Common
              Indexing Protocol (CIP)", RFC 2651, August 1999.

   [CIP-MIME] Allen, J. and M. Mealling, "MIME Object Definitions for
              the Common Indexing Protocol (CIP)", RFC 2652, August
              1999.

   [ABNF]     Crocker, D. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", RFC 2234, November 1997.

   [CIP-TIO]  Hedberg, R., Greenblatt, B., Moats, R. and M. Wahl, "A
              Tagged Index Object for use in the Common Indexing
              Protocol", RFC 2654, August 1999.

   [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.



Allen, et al.               Standards Track                     [Page 9]

RFC 2653                CIP Transport Protocols              August 1999


   [MIME-SEC] Galvin, J., Murphy, S., Crocker, S. and N. Freed,
              "Security Multiparts for MIME: Multipart/Signed and
              Multipart/Encrypted", RFC 1847, October 1995.

   [TLS]      Dierks, T. and C. Allen, "The TLS Protocol Version 1.0",
              RFC 2246, January 1999.

   [SMTPTLS]  Hoffman, P., "SMTP Service Extension for Secure SMTP over
              TLS", RFC 2487, January 1999.

   [MHREG]    Jacob, P., "Mail and Netnews Header Registration
              Procedure", Work in Progress.

5.   Authors' Addresses

   Jeff R. Allen
   246 Hawthorne St.
   Palo Alto, CA  94301

   EMail: jeff.allen@acm.org


   Paul J. Leach
   Microsoft
   1 Microsoft Way
   Redmond, WA 98052

   EMail: paulle@microsoft.com


   Roland Hedberg
   Catalogix
   Dalsveien 53
   0775 Oslo
   Norway

   EMail: roland@catalogix.ac.se














Allen, et al.               Standards Track                    [Page 10]

RFC 2653                CIP Transport Protocols              August 1999


6.  Full Copyright Statement

   Copyright (C) The Internet Society (1999).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.



















Allen, et al.               Standards Track                    [Page 11]


 

RFC, FYI, BCP