Network Working Group P. Pate
Request for Comments: 3020 B. Lynch
Category: Standards Track Overture Networks
K. Rehbehn
Megisto Systems, Inc.
December 2000
Definitions of Managed Objects
for Monitoring and Controlling the
UNI/NNI Multilink Frame Relay Function
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2000). All Rights Reserved.
Abstract
This memo defines a Management Information Base (MIB) for monitoring
and controlling a UNI/NNI Multilink Frame Relay Function as defined
in Frame Relay Forum FRF.16. This MIB also includes conformance and
notification information.
Table of Contents
1 The SNMP Management Framework ................................ 2
2 Overview ..................................................... 3
2.1 Multilink Frame Relay Background ........................... 3
2.1.1 Terminology .............................................. 4
2.1.2 Reference Model .......................................... 5
2.2 Structure of the MIB ....................................... 5
2.2.1 mfrBundleMaxNumBundles ................................... 6
2.2.2 mfrBundleNextIndex ....................................... 6
2.2.3 mfrBundleTable ........................................... 6
2.2.4 Bundle-to-ifIndex Mapping Table .......................... 6
2.2.5 mfrBundleLinkTable ....................................... 6
2.3 Relationship With Other MIBS and Tables .................... 7
2.3.1 Relationship With Interface Table ........................ 7
2.3.1.1 Bundle Links ........................................... 7
2.3.1.2 Bundles ................................................ 7
Pate, et al. Standards Track [Page 1]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
2.3.1.3 Mapping Between ifIndex and mfrBundleIndex ............. 8
2.3.1.4 ifTable Objects ........................................ 8
2.3.2 Relationship With Interface Stack Table .................. 9
2.3.3 Relationship With Frame Relay DTE MIB .................... 9
2.3.4 Relationship With Frame Relay Service MIB ................ 9
2.3.5 Example .................................................. 9
2.4 Creation Of Bundles and Bundle Links ....................... 11
2.4.1 Creation Of Bundles ...................................... 11
2.4.2 Creation Of Bundle Links ................................. 11
2.5 Notifications .............................................. 11
2.5.1 Bundle ................................................... 11
2.5.1.1 linkUp ................................................. 12
2.5.1.2 linkDown ............................................... 12
2.5.2 Bundle Link .............................................. 12
2.5.2.1 linkUp ................................................. 12
2.5.2.2 linkDown ............................................... 12
2.5.2.3 mfrMibTrapBundleLinkMismatch ........................... 12
3 Object Definitions ........................................... 13
4 Acknowledgments .............................................. 32
5 References ................................................... 32
6 Security Considerations ...................................... 34
7 Authors' Addresses ........................................... 35
8 Full Copyright Statement ..................................... 36
1. The SNMP Management Framework
The SNMP Management Framework presently consists of five major
components:
o An overall architecture, described in RFC 2571 [RFC2571].
o Mechanisms for describing and naming objects and events for the
purpose of management. The first version of this Structure of
Management Information (SMI) is called SMIv1 and described in STD
16, RFC 1155 [RFC1155], STD 16, RFC 1212 [RFC1212] and RFC 1215
[RFC1215]. The second version, called SMIv2, is described in STD
58: RFC 2578 [RFC2578], RFC 2579 [RFC2579] and RFC 2580 [RFC2580].
o Message protocols for transferring management information. The
first version of the SNMP message protocol is called SNMPv1 and
described in STD 15, RFC 1157 [RFC1157]. A second version of the
SNMP message protocol, which is not an Internet standards track
protocol, is called SNMPv2c and described in RFC 1901 [RFC1901]
and RFC 1906 [RFC1906]. The third version of the message protocol
is called SNMPv3 and described in RFC 1906 [RFC1906], RFC 2572
[RFC2572] and RFC 2574 [RFC2574].
Pate, et al. Standards Track [Page 2]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
o Protocol operations for accessing management information. The
first set of protocol operations and associated PDU formats is
described in STD 15, RFC 1157 [RFC1157]. A second set of protocol
operations and associated PDU formats is described in RFC 1905
[RFC1905].
o A set of fundamental applications described in RFC 2573 [RFC2573]
and the view-based access control mechanism described in RFC 2575
[RFC2575].
A more detailed introduction to the current SNMP Management Framework
can be found in RFC 2570 [RFC2570].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. Objects in the MIB are
defined using the mechanisms defined in the SMI.
This memo specifies a MIB module that is compliant to the SMIv2. A
MIB conforming to the SMIv1 can be produced through the appropriate
translations. The resulting translated MIB must be semantically
equivalent, except where objects or events are omitted because no
translation is possible (use of Counter64). Some machine readable
information in SMIv2 will be converted into textual descriptions in
SMIv1 during the translation process. However, this loss of machine
readable information is not considered to change the semantics of the
MIB.
2. Overview
This document defines a Management Information Base (MIB) for
monitoring and controlling the UNI/NNI Multilink Frame Relay
function. The agreement on which this MIB is based was defined and
documented by the Frame Relay Forum in the Frame Relay Forum Document
FRF.16 [FRF.16].
2.1. Multilink Frame Relay Background
Multilink Frame Relay (MFR) for the User-to-Network Interface (UNI)
and the Network-to-Network Interface (NNI) provides physical
interface emulation for frame relay devices. The emulated physical
interface consists of one or more physical links, called "bundle
links", aggregated together into a single "bundle" of bandwidth.
This service provides a frame-based inverse multiplexing function,
sometimes referred to as an "IMUX".
Pate, et al. Standards Track [Page 3]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
The bundle provides the same order-preserving service as a physical
layer for frames sent on a data link connection. In addition, the
bundle provides support for all Frame Relay services based on UNI and
NNI standards.
2.1.1. Terminology
Physical Link -- A single physical interface that interconnects
two devices in a frame relay network (e.g., DS1,
DS0, Bearer channel, refer to FRF.14).
Bundle -- A grouping of one or more physical links using
the formats and procedures of multilink frame
relay. The bundle operates as a logical
interface function that emulates a single
physical interface to the Q.922 data link layer.
Bundle Link -- A MFR sub-component that controls operation of
one of the bundle's physical links.
Pate, et al. Standards Track [Page 4]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
2.1.2. Reference Model
+--------------------------+ +--------------------------+
| Switching Layer -OR- | | Switching Layer -OR- |
| Higher-Level Applications| | Higher-Level Applications|
+--------------------------+ +--------------------------+
| |C-Plane - Q.933| | |C-Plane - Q.933|
| U-Plane | (Note 1) | | U-Plane | (Note 1) |
| (Note 3) |---------------| | (Note 3) |---------------|
| |Q.922 (Note 2) | | |Q.922 (Note 2) |
+--------------------------+ +--------------------------+
| Data Link Layer (Q.922) | | Data Link Layer (Q.922) |
+--------------------------+ +--------------------------+
| Bundle (B) | | Bundle (B) |
+--------------------------+ +--------------------------+
| Bundle | Bundle | Bundle | | Bundle | Bundle | Bundle |
| Link | Link | Link | | Link | Link | Link |
| (BL) | (BL) | (BL) | | (BL) | (BL) | (BL) |
+--------+--------+--------+ +--------+--------+--------+
|Physical|Physical|Physical| |Physical|Physical|Physical|
| (PH) | (PH) | (PH) | __________ | (PH) | (PH) | (PH) |
+----+---+----+---+----+---+ /\ \ +----+---+----+---+----+---+
| | | / \ \ | | |
| | +--------\ \-----+ | |
| | / \ \ | |
| +-------------------\ \------------+ |
| _________\_______/ Bundle /_ |
| /\ / / \ |
+------------| Bundle Link / / |------------------+
\/_____________/ /____/
\/__________/
Figure 1: MFR Reference Diagram
Note 1: C-Plane operation as described in Q.933 [Q.933] and FRF.4
[FRF.4]
Note 2: Multiple frame acknowledged information transfer mode as
described in Q.922 [Q.922]
Note 3: Core aspects for use with frame relay bearer service as
described in Q.922, Annex A [Q.922]
2.2. Structure of the MIB
The UNI/NNI MFR managed objects consist of two scalar objects and
three tables.
Pate, et al. Standards Track [Page 5]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
2.2.1. mfrBundleMaxNumBundles
This scalar is used to inform the manager of the maximum number of
bundles supported by this device.
2.2.2. mfrBundleNextIndex
This scalar is used to assist the manager in selecting a value for
mfrBundleIndex during row creation. It can also be used to avoid
race conditions with multiple managers trying to create rows in the
table (see RFC 2494 [RFC2494] for one such algorithm).
2.2.3. mfrBundleTable
This table provides a means to configure and monitor bundles. It is
indexed by mfrBundleIndex and contains these columns:
- mfrBundleIndex Integer32
- mfrBundleIfIndex InterfaceIndex
- mfrBundleRowStatus RowStatus
- mfrBundleNearEndName SnmpAdminString
- mfrBundleFragmentation INTEGER
- mfrBundleMaxFragSize Integer32
- mfrBundleTimerHello INTEGER
- mfrBundleTimerAck INTEGER
- mfrBundleCountMaxRetry INTEGER
- mfrBundleActivationClass INTEGER
- mfrBundleThreshold Integer32
- mfrBundleMaxDiffDelay Integer32
- mfrBundleSeqNumSize INTEGER
- mfrBundleLinksConfigured Integer32
- mfrBundleLinksActive Integer32
- mfrBundleBandwidth Integer32
- mfrBundleFarEndName SnmpAdminString
- mfrBundleResequencingErrors Counter32
2.2.4. Bundle-to-ifIndex Mapping Table
This table provides a means to take an ifIndex and find the
corresponding mfrBundleIndex. It is indexed by ifIndex and contains
these columns:
- mfrBundleIfIndexMapping Integer32
2.2.5. mfrBundleLinkTable
This table provides a means to configure and monitor bundle links.
It is indexed by ifIndex and contains these columns:
Pate, et al. Standards Track [Page 6]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
- mfrBundleLinkRowStatus RowStatus
- mfrBundleLinkConfigBundleIndex Integer32
- mfrBundleLinkNearEndName SnmpAdminString
- mfrBundleLinkState MfrBundleLinkState
- mfrBundleLinkFarEndName SnmpAdminString
- mfrBundleLinkFarEndBundleName SnmpAdminString
- mfrBundleLinkDelay Integer32
- mfrBundleLinkFramesControlTx Counter32
- mfrBundleLinkFramesControlRx Counter32
- mfrBundleLinkFramesControlInvalid Counter32
- mfrBundleLinkTimerExpiredCount Counter32
- mfrBundleLinkLoopbackSuspected Counter32
- mfrBundleLinkUnexpectedSequence Counter32
- mfrBundleLinkMismatch Counter32
2.3. Relationship With Other MIBS and Tables
2.3.1. Relationship With Interface Table
2.3.1.1. Bundle Links
Each bundle link will appear as an interface in the ifTable. The
ifIndex that appears in the ifTable is used for indexing the bundle
link tables in the UNI-NNI MFR MIB.
2.3.1.2. Bundles
Each bundle will appear as an interface in the ifTable. There will
be corresponding mfrBundleIndex which may be different than the
ifIndex of the bundle.
The reason is best summarized in RFC 2494 [RFC2494], which describes
frame relay bundle of DS0. It says:
This table is not indexed by ifIndex because the manager has to
choose the index in a createable row and the agent must be allowed
to select ifIndex values.
The rows in the ifEntry table are not createable as they do not have
row status. RFC 2863 [RFC2863] suggests that the ifIndex should be
chosen by the agent. Here is its statement regarding row creation
and deletion:
While some interfaces, for example, most physical interfaces,
cannot be created via network management, other interfaces such as
logical interfaces sometimes can be. The ifTable contains only
generic information about an interface. Almost all 'create-able'
interfaces have other, media-specific, information through which
Pate, et al. Standards Track [Page 7]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
configuration parameters may be supplied prior to creating such an
interface. Thus, the ifTable does not itself support the creation
or deletion of an interface (specifically, it has no RowStatus
column). Rather, if a particular interface type supports the
dynamic creation and/or deletion of an interface of that type,
then that media-specific MIB should include an appropriate
RowStatus object (see the ATM LAN-Emulation Client MIB [ATMLANE]
for an example of a MIB which does this). Typically, when such a
RowStatus object is created/deleted, then the conceptual row in
the ifTable appears/disappears as a by-product, and an ifIndex
value (chosen by the agent) is stored in an appropriate object in
the media-specific MIB.
The ATM LAN-Emulation Client MIB [ATMLANE] uses different indices and
so does the IMA MIB [ATMIMA]. Looking at the examples we have, and
the statements from RFC, it seems better to have two indices. This
gives the SNMP agent implementor the freedom to manage their ifIndex
in the way they like.
2.3.1.3. Mapping Between ifIndex and mfrBundleIndex
The mfrBundleIfIndexMappingTable is indexed by ifIndex and provides
the means to map a given ifIndex into the corresponding
mfrBundleIndex. The mfrBundleIfIndexMapping object in the
mfrBundleTable (indexed by mfrBundleIndex) provides the reverse
mapping of a mfrBundleIndex to the corresponding ifIndex in the
ifTable.
2.3.1.4. ifTable Objects
The bundle configuration and status table. There is a one-to-one
correspondence between a bundle and an interface represented in the
ifTable.
The following objects of the ifTable have specific meaning for an MFR
bundle:
ifAdminStatus - the bundle admin status
ifOperStatus - the bundle operational status
ifSpeed - the current bandwidth of the bundle
ifInUcastPkts - the number of frames received on the bundle
ifOutUcastPkts - the number of frames transmitted on the bundle
ifInErrors - frame (not fragment) errors
ifOutErrors - frame (not fragment) errors
The following objects of the ifTable have specific meaning for an MFR
bundle link:
Pate, et al. Standards Track [Page 8]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
ifAdminStatus - the bundle link admin status
ifOperStatus - the bundle link operational status
ifSpeed - the bandwidth of the bundle link interface
ifInUcastPkts - the number of frames received on the bundle link
ifOutUcastPkts - the number of frames transmitted on the bundle
link
ifInErrors - frame and fragment errors
ifOutErrors - frame and fragment errors
2.3.2. Relationship With Interface Stack Table
The bundles and bundle links will appear in the ifStackTable defined
in RFC 2863 [RFC2863]. Each bundle link will appear a lower layer to
its owner bundle. The bundle will appear as a higher layer to the
bundle links and as a lower layer to a frame relay service or UNI.
2.3.3. Relationship With Frame Relay DTE MIB
The bundle will have a one-to-one correspondence with a DLCMI or UNI
that appear in the DTE MIB tables [RFC2115].
2.3.4. Relationship With Frame Relay Service MIB
There is a one-to-one relationship between the MFR bundle and the
frame relay service logical port defined in RFC1604 [RFC1604].
2.3.5. Example
Figure two shows an example of how the various tables are related.
This example shows two bundles composed of 2 T1s each. The bundles
have a mfrBundleIndex of 10 and 20 respectively.
+-------------------------+
| Frame Relay Service |
+-----+-------------+-----+
| |
+-----+------+------+-----+
| MFR Bundle | MFR Bundle |
| 10 | 20 |
+--+-----+---+---+-----+--+
| | | |
+-+-+ +-+-+ +-+-+ +-+-+
|T1 | |T1 | |T1 | |T1 |
+---+ +---+ +-+-+ +---+
Figure 2: Frame Relay Service Being Carried on 4 T1s
Pate, et al. Standards Track [Page 9]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
The assignment of the ifTable index values could for example be:
ifIndex | Description | ifType
--------+----------------------------+----------------------
1 | FrameRelayService | frameRelayService(44)
2 | MFR Bundle #10 | frf16MfrBundle(163)
3 | MFR Bundle #20 | frf16MfrBundle(163)
4 | ds1 #1/MFR Bundle Link #1 | ds1(18)
5 | ds1 #2/MFR Bundle Link #2 | ds1(18)
6 | ds1 #3/MFR Bundle Link #3 | ds1(18)
7 | ds1 #4/MFR Bundle Link #4 | ds1(18)
The ifStackTable is then used to show the relationships between the
various interfaces.
HigherLayer | LowerLayer
------------+-----------
0 | 1
1 | 2
1 | 3
2 | 4
2 | 5
3 | 6
3 | 7
4 | 0
5 | 0
6 | 0
7 | 0
The mfrBundleIfIndexMappingTable shows the relationship between the
ifTable ifIndex and the mfrBundleIndex:
ifIndex | mfrBundleIfIndexMappingIndex
--------+-----------------------------
2 | 10
3 | 20
The mfrBundleTable shows the relationship between the mfrBundleIndex
and the ifIndex:
mfrBundleIndex | mfrBundleIfIndex
---------------+-----------------
10 | 2
20 | 3
Pate, et al. Standards Track [Page 10]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
The mfrBundleLinkTable shows the relationship between the bundles and
bundle links:
mfrBundleIndex | mfrBundleLinkIfIndex
---------------+---------------------
10 | 4
10 | 5
20 | 6
20 | 7
2.4. Creation Of Bundles and Bundle Links
2.4.1. Creation Of Bundles
A new bundle is created by setting a createAndGo(4) value in the
mfrBundleRowStatus RowStatus object. Optionally, an agent could also
support setting a value of createAndWait(5) followed by a set to the
value active(1).
When a bundle is created, the agent must create a new interface in
the ifTable. The ifIndex for this new interface is used for the
value of mfrBundleIfIndex.
2.4.2. Creation Of Bundle Links
A new bundle link is created by setting a createAndGo(4) value in the
mfrBundleLinkRowStatus RowStatus object.
The bundle link is associated with a specific physical interface and
uses the ifIndex of the physical interface. The mfrBundleLinkEntry
row objects may be created after or during creation of the physical
interface's ifEntry row objects.
The bundle identified in the object mfrBundleIndex must exist at time
of bundle link creation.
2.5. Notifications
The linkUp and linkDown traps are defined in RFC 2223 [RFC2223].
2.5.1. Bundle
The following SNMP traps are defined for MFR bundles.
Pate, et al. Standards Track [Page 11]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
2.5.1.1. linkUp
This trap is sent when the ifOperStatus of a bundle transitions from
down to up. This occurs when a sufficient number of links
(determined by mfrBundleActivationClass and mfrBundleThreshold) are
in the operationally up state.
2.5.1.2. linkDown
This trap is sent when the ifOperStatus of a bundle transitions from
up to down. This occurs when a insufficient number of links
(determined by mfrBundleActivationClass and mfrBundleThreshold) are
in the operationally up state.
2.5.2. Bundle Link
The following SNMP traps are defined for MFR bundle links.
2.5.2.1. linkUp
This trap is sent when a mfrBundleLinkState object transitions to the
value mfrBundleLinkStateUp.
2.5.2.2. linkDown
This trap is sent when a mfrBundleLinkState object transitions from
the value mfrBundleLinkStateUp.
2.5.2.3. mfrMibTrapBundleLinkMismatch
This trap indicates that a bundle link mismatch has been detected.
The following objects are reported:
- mfrBundleNearEndName: configured name of near end bundle
- mfrBundleFarEndName: previously reported name of far
end bundle
- mfrBundleLinkNearEndName: configured name of near end bundle
- mfrBundleLinkFarEndName: reported name of far end bundle
- mfrBundleLinkFarEndBundleName: currently reported name of far
end bundle
Note that the configured items may have been configured
automatically. Note also that the mfrBundleLinkMismatch counter is
incremented when the trap is sent.
Pate, et al. Standards Track [Page 12]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
3. Object Definitions
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. Objects in the MIB are
defined using the subset of Abstract Syntax Notation One (ASN.1)
defined in the SMI. In particular, each object type is named by an
OBJECT IDENTIFIER, an administratively assigned name. The object
type together with an object instance serves to uniquely identify a
specific instantiation of the object. For human convenience, we
often use a textual string, termed the descriptor, to refer to the
object type.
FR-MFR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32,
NOTIFICATION-TYPE, transmission
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TestAndIncr, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InterfaceIndex, ifIndex
FROM IF-MIB;
mfrMib MODULE-IDENTITY
LAST-UPDATED "200011300000Z"
ORGANIZATION "IETF Frame Relay Service MIB (frnetmib)
Working Group"
CONTACT-INFO
"WG Charter:
http://www.ietf.org/html.charters/frnetmib-charter.html
WG-email: frnetmib@sunroof.eng.sun.com
Subscribe: frnetmib-request@sunroof.eng.sun.com
Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib
Chair: Andy Malis
Vivace Networks
Email: Andy.Malis@vivacenetworks.com
WG editor: Prayson Pate
Overture Networks
Email: prayson.pate@overturenetworks.com
Co-author: Bob Lynch
Overture Networks
Pate, et al. Standards Track [Page 13]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
EMail: bob.lynch@overturenetworks.com
Co-author: Kenneth Rehbehn
Megisto Systems, Inc.
EMail: krehbehn@megisto.com"
DESCRIPTION
"This is the MIB used to control and monitor the multilink
frame relay (MFR) function described in FRF.16."
-- ---------------------------------------------------------
-- ---------------------------------------------------------
-- Revision History
-- ---------------------------------------------------------
-- ---------------------------------------------------------
REVISION "200011300000Z"
DESCRIPTION
"Published as RFC 3020."
::= { transmission 47 }
-- ---------------------------------------------------------
-- ---------------------------------------------------------
-- Textual Conventions
-- ---------------------------------------------------------
-- ---------------------------------------------------------
MfrBundleLinkState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The possible states for a bundle link, as defined in
Annex A of FRF.16."
REFERENCE "FRF.16 Annex A"
SYNTAX INTEGER {
mfrBundleLinkStateAddSent (1),
mfrBundleLinkStateAddRx (2),
mfrBundleLinkStateAddAckRx (3),
mfrBundleLinkStateUp (4),
mfrBundleLinkStateIdlePending (5),
mfrBundleLinkStateIdle (6),
mfrBundleLinkStateDown (7),
mfrBundleLinkStateDownIdle (8)
}
-- ---------------------------------------------------------
-- ---------------------------------------------------------
-- Object Identifiers
Pate, et al. Standards Track [Page 14]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
-- ---------------------------------------------------------
-- ---------------------------------------------------------
mfrMibScalarObjects OBJECT IDENTIFIER ::= { mfrMib 1 }
mfrMibBundleObjects OBJECT IDENTIFIER ::= { mfrMib 2 }
mfrMibBundleLinkObjects OBJECT IDENTIFIER ::= { mfrMib 3 }
mfrMibTraps OBJECT IDENTIFIER ::= { mfrMib 4 }
mfrMibConformance OBJECT IDENTIFIER ::= { mfrMib 5 }
mfrMibTrapsPrefix OBJECT IDENTIFIER ::= { mfrMibTraps 0 }
mfrMibGroups OBJECT IDENTIFIER ::= { mfrMibConformance 1 }
mfrMibCompliances OBJECT IDENTIFIER ::= { mfrMibConformance 2 }
-- ---------------------------------------------------------
-- ---------------------------------------------------------
-- Scalars
-- ---------------------------------------------------------
-- ---------------------------------------------------------
mfrBundleMaxNumBundles OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to inform the manager of the
maximum number of bundles supported by this device."
::= { mfrMibScalarObjects 1 }
mfrBundleNextIndex OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to assist the manager in
selecting a value for mfrBundleIndex during row creation
in the mfrBundleTable. It can also be used to avoid race
conditions with multiple managers trying to create
rows in the table (see RFC 2494 [RFC2494] for one such
alogrithm)."
REFERENCE "RFC 2494"
::= { mfrMibScalarObjects 2 }
-- ---------------------------------------------------------
-- ---------------------------------------------------------
-- Bundle Table
-- ---------------------------------------------------------
-- ---------------------------------------------------------
Pate, et al. Standards Track [Page 15]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
mfrBundleTable OBJECT-TYPE
SYNTAX SEQUENCE OF MfrBundleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The bundle configuration and status table. There
is a one-to-one correspondence between a bundle
and an interface represented in the ifTable.
The following objects of the ifTable have specific
meaning for an MFR bundle:
ifAdminStatus - the bundle admin status
ifOperStatus - the bundle operational status
ifSpeed - the current bandwidth of the bundle
ifInUcastPkts - the number of frames received
on the bundle
ifOutUcastPkts - the number of frames transmitted
on the bundle
ifInErrors - frame (not fragment) errors
ifOutErrors - frame (not fragment) errors
"
::= { mfrMibBundleObjects 3 }
mfrBundleEntry OBJECT-TYPE
SYNTAX MfrBundleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the bundle table."
INDEX { mfrBundleIndex }
::= { mfrBundleTable 1 }
MfrBundleEntry ::=
SEQUENCE {
mfrBundleIndex
Integer32,
mfrBundleIfIndex
InterfaceIndex,
mfrBundleRowStatus
RowStatus,
mfrBundleNearEndName
SnmpAdminString,
mfrBundleFragmentation
INTEGER,
mfrBundleMaxFragSize
Integer32,
mfrBundleTimerHello
INTEGER,
Pate, et al. Standards Track [Page 16]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
mfrBundleTimerAck
INTEGER,
mfrBundleCountMaxRetry
INTEGER,
mfrBundleActivationClass
INTEGER,
mfrBundleThreshold
Integer32,
mfrBundleMaxDiffDelay
Integer32,
mfrBundleSeqNumSize
INTEGER,
mfrBundleMaxBundleLinks
Integer32,
mfrBundleLinksConfigured
Integer32,
mfrBundleLinksActive
Integer32,
mfrBundleBandwidth
Integer32,
mfrBundleFarEndName
SnmpAdminString,
mfrBundleResequencingErrors
Counter32
}
mfrBundleIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into the table. While this corresponds
to an entry in the ifTable, the value of mfrBundleIndex
need not match that of the ifIndex in the ifTable.
A manager can use mfrBundleNextIndex to select a unique
mfrBundleIndex for creating a new row."
::= { mfrBundleEntry 1 }
mfrBundleIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value must match an entry in the interface
table whose ifType must be set to frf16MfrBundle(163).
For example: if the value of mfrBundleIfIndex is 10,
then a corresponding entry should be present in
Pate, et al. Standards Track [Page 17]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
the ifTable with an index of 10 and an ifType of 163."
::= { mfrBundleEntry 2 }
mfrBundleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mfrBundleRowStatus object allows create, change,
and delete operations on bundle entries."
REFERENCE "RFC 1903"
::= { mfrBundleEntry 3 }
mfrBundleNearEndName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured name of the bundle."
REFERENCE "FRF.16 section 3.4.1"
::= { mfrBundleEntry 4 }
mfrBundleFragmentation OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls whether the bundle performs/accepts
fragmentation and re-assembly. The possible
values are:
enable(1) - Bundle links will fragment frames
disable(2) - Bundle links will not fragment
frames."
DEFVAL { disable }
::= { mfrBundleEntry 5 }
mfrBundleMaxFragSize OBJECT-TYPE
SYNTAX Integer32 (-1..8184)
UNITS "Octets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum fragment size supported. Note that this
Pate, et al. Standards Track [Page 18]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
is only valid if mfrBundleFragmentation is set to enable(1).
Zero is not a valid fragment size.
A bundle that does not support fragmentation must return
this object with a value of -1."
DEFVAL { -1 }
::= { mfrBundleEntry 6 }
mfrBundleTimerHello OBJECT-TYPE
SYNTAX INTEGER (1..180)
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured MFR Hello Timer value."
REFERENCE "FRF.16 section 4.3.8.1"
DEFVAL { 10 }
::= { mfrBundleEntry 7 }
mfrBundleTimerAck OBJECT-TYPE
SYNTAX INTEGER (1..10)
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured MFR T_ACK value."
REFERENCE "FRF.16 section 4.3.8.2"
DEFVAL { 4 }
::= { mfrBundleEntry 8 }
mfrBundleCountMaxRetry OBJECT-TYPE
SYNTAX INTEGER (1..5)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MFR N_MAX_RETRY value."
REFERENCE "FRF.16 section 4.3.8.3"
DEFVAL { 2 }
::= { mfrBundleEntry 9 }
mfrBundleActivationClass OBJECT-TYPE
SYNTAX INTEGER {
mfrBundleActivationClassA (1),
mfrBundleActivationClassB (2),
mfrBundleActivationClassC (3),
mfrBundleActivationClassD (4)
}
Pate, et al. Standards Track [Page 19]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls the conditions under which the bundle is activated.
The following settings are available:
mfrBundleActivationClassA(1) - at least one must link up
mfrBundleActivationClassB(2) - all links must be up
mfrBundleActivationClassC(3) - a certain number must be
up. Refer to
mfrBundleThreshold for
the required number.
mfrBundleActivationClassD(4) - custom (implementation
specific)."
REFERENCE "FRF.16 section 4.2.2.1"
DEFVAL { mfrBundleActivationClassA }
::= { mfrBundleEntry 10 }
mfrBundleThreshold OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "Bundle Links"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the number of links that must be in operational
'up' state before the bundle will transition to an
operational up/active state. If the number of
operational 'up' links falls below this value,
then the bundle will transition to an inactive
state.
Note - this is only valid when mfrBundleActivationClass
is set to mfrBundleActivationClassC or, depending upon the
implementation, to mfrBundleActivationClassD. A bundle that
is not set to one of these must return this object with a
value of -1."
REFERENCE "FRF.16 section 4.2.2.1"
DEFVAL { -1 }
::= { mfrBundleEntry 11 }
mfrBundleMaxDiffDelay OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "Milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum delay difference between the bundle
links.
Pate, et al. Standards Track [Page 20]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
A value of -1 indicates that this object does not contain
a valid value"
DEFVAL { -1 }
::= { mfrBundleEntry 12 }
mfrBundleSeqNumSize OBJECT-TYPE
SYNTAX INTEGER {
seqNumSize12bit (1),
seqNumSize24bit (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls whether the standard FRF.12 12-bit
sequence number is used or the optional 24-bit
sequence number."
REFERENCE "FRFTC/99-194"
DEFVAL { seqNumSize12bit }
::= { mfrBundleEntry 13 }
mfrBundleMaxBundleLinks OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "Bundle Links"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of bundle links supported for
this bundle."
::= { mfrBundleEntry 14 }
mfrBundleLinksConfigured OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "Bundle Links"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of links configured for the bundle."
::= { mfrBundleEntry 15 }
mfrBundleLinksActive OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "Bundle Links"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of links that are active."
::= { mfrBundleEntry 16 }
Pate, et al. Standards Track [Page 21]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
mfrBundleBandwidth OBJECT-TYPE
SYNTAX Integer32
UNITS "Bits/Sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of available bandwidth on the bundle"
::= { mfrBundleEntry 17 }
mfrBundleFarEndName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the bundle received from the far end."
REFERENCE "FRF.16 section 3.4.1"
::= { mfrBundleEntry 18 }
mfrBundleResequencingErrors OBJECT-TYPE
SYNTAX Counter32
UNITS "Error Events"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of resequencing errors. Each event
may correspond to multiple lost frames. Example:
Say sequence number 56, 59 and 60 is received for DLCI 100.
It is decided by some means that sequence 57 and 58 is lost.
This counter should then be incremented by ONE, even though
two frames were lost."
::= { mfrBundleEntry 19 }
-- ---------------------------------------------------------
-- ---------------------------------------------------------
-- ifIndex Mapping to Bundle Index Table
-- ---------------------------------------------------------
-- ---------------------------------------------------------
mfrBundleIfIndexMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MfrBundleIfIndexMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table mapping the values of ifIndex to the
mfrBundleIndex. This is required in order to find
the mfrBundleIndex given an ifIndex. The mapping of
mfrBundleIndex to ifIndex is provided by the
mfrBundleIfIndex entry in the mfrBundleTable."
Pate, et al. Standards Track [Page 22]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
::= { mfrMibBundleObjects 4 }
mfrBundleIfIndexMappingEntry OBJECT-TYPE
SYNTAX MfrBundleIfIndexMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row describes one ifIndex to mfrBundleIndex mapping."
INDEX { ifIndex }
::= { mfrBundleIfIndexMappingTable 1 }
MfrBundleIfIndexMappingEntry ::=
SEQUENCE {
mfrBundleIfIndexMappingIndex
Integer32
}
mfrBundleIfIndexMappingIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mfrBundleIndex of the given ifIndex."
::= { mfrBundleIfIndexMappingEntry 2 }
-- ---------------------------------------------------------
-- ---------------------------------------------------------
-- Bundle Link Table
-- ---------------------------------------------------------
-- ---------------------------------------------------------
mfrBundleLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF MfrBundleLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The bundle link configuration and status table. There
is a one-to-one correspondence between a bundle link
and a physical interface represented in the ifTable. The
ifIndex of the physical interface is used to index the
bundle link table, and to create rows.
The following objects of the ifTable have specific
meaning for an MFR bundle link:
ifAdminStatus - the bundle link admin status
ifOperStatus - the bundle link operational
status
Pate, et al. Standards Track [Page 23]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
ifSpeed - the bandwidth of the bundle
link interface
ifInUcastPkts - the number of frames received
on the bundle link
ifOutUcastPkts - the number of frames transmitted
on the bundle link
ifInErrors - frame and fragment errors
ifOutErrors - frame and fragment errors"
::= { mfrMibBundleLinkObjects 1 }
mfrBundleLinkEntry OBJECT-TYPE
SYNTAX MfrBundleLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the bundle link table."
INDEX { ifIndex }
::= { mfrBundleLinkTable 1 }
MfrBundleLinkEntry ::=
SEQUENCE {
mfrBundleLinkRowStatus
RowStatus,
mfrBundleLinkConfigBundleIndex
Integer32,
mfrBundleLinkNearEndName
SnmpAdminString,
mfrBundleLinkState
MfrBundleLinkState,
mfrBundleLinkFarEndName
SnmpAdminString,
mfrBundleLinkFarEndBundleName
SnmpAdminString,
mfrBundleLinkDelay
Integer32,
mfrBundleLinkFramesControlTx
Counter32,
mfrBundleLinkFramesControlRx
Counter32,
mfrBundleLinkFramesControlInvalid
Counter32,
mfrBundleLinkTimerExpiredCount
Counter32,
mfrBundleLinkLoopbackSuspected
Counter32,
mfrBundleLinkUnexpectedSequence
Counter32,
mfrBundleLinkMismatch
Pate, et al. Standards Track [Page 24]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
Counter32
}
mfrBundleLinkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mfrBundleLinkRowStatus object allows create, change,
and delete operations on mfrBundleLink entries.
The create operation must fail if no physical interface
is associated with the bundle link."
::= { mfrBundleLinkEntry 1 }
mfrBundleLinkConfigBundleIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mfrBundleLinkConfigBundleIndex object allows
the manager to control the bundle to which the bundle
link is assigned. If no value were in this field, then
the bundle would remain in NOT_READY rowStatus and be
unable to go to active. With an appropriate mfrBundleIndex
in this field, then we could put the mfrBundleLink row in
NOT_IN_SERVICE or ACTIVE rowStatus."
::= { mfrBundleLinkEntry 2 }
mfrBundleLinkNearEndName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured bundle link name that is sent to the far end."
::= { mfrBundleLinkEntry 3 }
mfrBundleLinkState OBJECT-TYPE
SYNTAX MfrBundleLinkState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current bundle link state as defined by the MFR protocol
described in Annex A of FRF.16."
REFERENCE "FRF.16 Annex A"
::= { mfrBundleLinkEntry 4 }
mfrBundleLinkFarEndName OBJECT-TYPE
Pate, et al. Standards Track [Page 25]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of bundle link received from far end."
REFERENCE "FRF.16 section 3.4.2"
::= { mfrBundleLinkEntry 5 }
mfrBundleLinkFarEndBundleName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of far end bundle for this link received from far end."
REFERENCE "FRF.16 section 3.4.1"
::= { mfrBundleLinkEntry 6 }
mfrBundleLinkDelay OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "Milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current round-trip delay for this bundle link. The
value -1 is returned when an implementation does not
support measurement of the bundle link delay."
REFERENCE "FRF.16 section 3.4.4"
::= { mfrBundleLinkEntry 7 }
mfrBundleLinkFramesControlTx OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MFR control frames sent."
REFERENCE "FRF.16 section 3.2"
::= { mfrBundleLinkEntry 8 }
mfrBundleLinkFramesControlRx OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of valid MFR control frames received."
REFERENCE "FRF.16 section 3.2"
::= { mfrBundleLinkEntry 9 }
Pate, et al. Standards Track [Page 26]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
mfrBundleLinkFramesControlInvalid OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid MFR control frames received."
REFERENCE "FRF.16 section 3.2"
::= { mfrBundleLinkEntry 10 }
mfrBundleLinkTimerExpiredCount OBJECT-TYPE
SYNTAX Counter32
UNITS "Timer Expiration Events"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the T_HELLO or T_ACK timers expired."
REFERENCE "FRF.16 section 4.3.8.1 and 4.3.8.2"
::= { mfrBundleLinkEntry 11 }
mfrBundleLinkLoopbackSuspected OBJECT-TYPE
SYNTAX Counter32
UNITS "Loopback Suspected Events"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a loopback has been suspected
(based upon the use of magic numbers)."
REFERENCE "FRF.16 section 4.3.7"
::= { mfrBundleLinkEntry 12 }
mfrBundleLinkUnexpectedSequence OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of data MFR frames discarded because the sequence
number of the frame for a DLCI was less than (delayed frame)
or equal to (duplicate frame) the one expected for that DLCI.
Example:
Say frames with sequence numbers 56, 58, 59 is received for
DLCI 100. While waiting for sequence number 57 another frame
with sequence number 58 arrives. Frame 58 is discarded and
the counter is incremented."
REFERENCE "FRF.16 section 4.2.3.2"
::= { mfrBundleLinkEntry 13 }
Pate, et al. Standards Track [Page 27]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
mfrBundleLinkMismatch OBJECT-TYPE
SYNTAX Counter32
UNITS "Bundle Name Mismatch Events"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the unit has been notified by the
remote peer that the bundle name is inconsistent with other
bundle links attached to the far-end bundle."
REFERENCE "FRF.16 section 4.3.2.4"
::= { mfrBundleLinkEntry 14 }
-- ---------------------------------------------------------
-- ---------------------------------------------------------
-- Notifications/Traps
-- ---------------------------------------------------------
-- ---------------------------------------------------------
mfrMibTrapBundleLinkMismatch NOTIFICATION-TYPE
OBJECTS {
mfrBundleNearEndName,
mfrBundleFarEndName,
mfrBundleLinkNearEndName,
mfrBundleLinkFarEndName,
mfrBundleLinkFarEndBundleName
}
STATUS current
DESCRIPTION
"This trap indicates that a bundle link mismatch has
been detected. The following objects are reported:
mfrBundleNearEndName: configured name of near end bundle
mfrBundleFarEndName: previously reported name of
far end bundle
mfrBundleLinkNearEndName: configured name of near end bundle
mfrBundleLinkFarEndName: reported name of far end bundle
mfrBundleLinkFarEndBundleName: currently reported name of
far end bundle
Note: that the configured items may have been configured
automatically.
Note: The mfrBundleLinkMismatch counter is incremented when
the trap is sent."
Pate, et al. Standards Track [Page 28]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
REFERENCE "FRF.16 section 4.3.2.4"
::= { mfrMibTrapsPrefix 1 }
-- ---------------------------------------------------------
-- ---------------------------------------------------------
-- Conformance/Compliance
-- ---------------------------------------------------------
-- ---------------------------------------------------------
mfrMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for equipment that implements
the FRF16 MIB. All of the current groups are mandatory,
but a number of objects may be read-only if the
implementation does not allow configuration."
MODULE -- this module
MANDATORY-GROUPS {
mfrMibBundleGroup,
mfrMibBundleLinkGroup,
mfrMibTrapGroup
}
OBJECT mfrBundleFragmentation
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, but the value used must be
reported."
OBJECT mfrBundleMaxFragSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, but the value used must be
reported.
A value of -1 indicates that the value is not applicable."
OBJECT mfrBundleThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, but the value used must be
reported.
A value of -1 indicates that the value is not applicable."
OBJECT mfrBundleMaxDiffDelay
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, but the value used must be
reported."
Pate, et al. Standards Track [Page 29]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
OBJECT mfrBundleSeqNumSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, but the value used must be
reported.
A value of -1 indicates that the value is not applicable."
::= { mfrMibCompliances 1 }
-- ---------------------------------------------------------
-- ---------------------------------------------------------
-- Units of Conformance
-- ---------------------------------------------------------
-- ---------------------------------------------------------
mfrMibBundleGroup OBJECT-GROUP
OBJECTS {
mfrBundleMaxNumBundles,
mfrBundleNextIndex,
mfrBundleIfIndex,
mfrBundleRowStatus,
mfrBundleNearEndName,
mfrBundleFragmentation,
mfrBundleMaxFragSize,
mfrBundleTimerHello,
mfrBundleTimerAck,
mfrBundleCountMaxRetry,
mfrBundleActivationClass,
mfrBundleThreshold,
mfrBundleMaxDiffDelay,
mfrBundleMaxBundleLinks,
mfrBundleLinksConfigured,
mfrBundleLinksActive,
mfrBundleBandwidth,
mfrBundleSeqNumSize,
mfrBundleFarEndName,
mfrBundleResequencingErrors,
mfrBundleIfIndexMappingIndex
}
STATUS current
DESCRIPTION
"Group of objects describing bundles."
::= { mfrMibGroups 1 }
mfrMibBundleLinkGroup OBJECT-GROUP
OBJECTS {
mfrBundleLinkRowStatus,
Pate, et al. Standards Track [Page 30]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
mfrBundleLinkConfigBundleIndex,
mfrBundleLinkNearEndName,
mfrBundleLinkState,
mfrBundleLinkFarEndName,
mfrBundleLinkFarEndBundleName,
mfrBundleLinkDelay,
mfrBundleLinkFramesControlTx,
mfrBundleLinkFramesControlRx,
mfrBundleLinkFramesControlInvalid,
mfrBundleLinkTimerExpiredCount,
mfrBundleLinkLoopbackSuspected,
mfrBundleLinkUnexpectedSequence,
mfrBundleLinkMismatch
}
STATUS current
DESCRIPTION
"Group of objects describing bundle links."
::= { mfrMibGroups 2 }
mfrMibTrapGroup NOTIFICATION-GROUP
NOTIFICATIONS {
mfrMibTrapBundleLinkMismatch
}
STATUS current
DESCRIPTION
"Group of objects describing notifications (traps)."
::= { mfrMibGroups 3 }
END
Pate, et al. Standards Track [Page 31]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
4. Acknowledgments
This document was produced by the Frame Relay Service MIB (frnetmib)
Working Group in conjunction with the Frame Relay Forum.
5. References
[RFC2571] Harrington, D., Presuhn, R. and B. Wijnen, "An Architecture
for Describing SNMP Management Frameworks", RFC 2571, April
1999.
[RFC1155] Rose, M. and K. McCloghrie, "Structure and Identification
of Management Information for TCP/IP-based Internets", STD
16, RFC 1155, May 1990.
[RFC1212] Rose, M. and K. McCloghrie, "Concise MIB Definitions", STD
16, RFC 1212, March 1991.
[RFC1215] Rose, M., "A Convention for Defining Traps for use with the
SNMP", RFC 1215, March 1991.
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999.
[RFC1157] Case, J., Fedor, M., Schoffstall, M. and J. Davin, "Simple
Network Management Protocol", STD 15, RFC 1157, May 1990.
[RFC1901] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Introduction to Community-based SNMPv2", RFC 1901, January
1996.
[RFC1906] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Transport Mappings for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1906, January 1996.
[RFC2572] Case, J., Harrington D., Presuhn R. and B. Wijnen, "Message
Processing and Dispatching for the Simple Network
Management Protocol (SNMP)", RFC 2572, April 1999.
Pate, et al. Standards Track [Page 32]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
[RFC2574] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", RFC 2574, April 1999.
[RFC1905] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Protocol Operations for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1905, January 1996.
[RFC2573] Levi, D., Meyer, P. and B. Stewart, "SNMPv3 Applications",
RFC 2573, April 1999.
[RFC2575] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based
Access Control Model (VACM) for the Simple Network
Management Protocol (SNMP)", RFC 2575, April 1999.
[RFC2570] Case, J., Mundy, R., Partain, D. and B. Stewart,
"Introduction to Version 3 of the Internet-standard Network
Management Framework", RFC 2570, April 1999.
[Q.922] ITU-T, Recommendation Q.922: "ISDN Data Link Layer
Specification For Frame Mode Bearer Services"
[Q.933] ITU-T, Recommendation Q.933: "Signalling Specification For
Frame Mode Basic Call Control"
[FRF.4] R. Cherukuri (ed), FRF.4: "Frame Relay User-to-Network SVC
Implementation Agreement" January 5, 1994.
[FRF.16] M. Sheehan (ed), FRF.16: "UNI/NNI Multilink Frame Relay
Interworking Implementation Agreement" August 20, 1999.
[RFC1604] Rehbehn, K. and D. Fowler, "Definitions of Managed Objects
for Frame Relay Service", RFC 2954, October 2000.
[RFC2494] Fowler, D., "Definitions of Managed Objects for the DS0 and
DS0 Bundle Interface Type", RFC 2494, November 1997.
[RFC2863] McCloghrie, D. and F. Kastenholz, "The Interfaces Group MIB
using SMIv2", RFC 2233, June 2000.
[ATMLANE] T. Newton, ed., "LAN Emulation Client Management
Specification Version 2.0" AF-LANE-0093.000, ATM Forum,
October, 1998
[ATMIMA] R. Vallee, ed., "Inverse Multiplexing for ATM Specification
Version 1.1" (Appendix A) AF-PHY-0086.001, ATM Forum,
March, 1999
Pate, et al. Standards Track [Page 33]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
[RFC2115] Brown, C. and F. Baker, "Management Information Base for
Frame Relay DTEs Using SMIv2", RFC 2115, September 1997.
6. Security Considerations
There are a number of management objects defined in this MIB that
have a MAX-ACCESS clause of read-write and/or read-create. Such
objects may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on
network operations.
No managed objects in this MIB contain sensitive information.
SNMPv1 by itself is not a secure environment. Even if the network
itself is secure (for example by using IPSec), even then, there is no
control as to who on the secure network is allowed to access and
GET/SET (read/change/create/delete) the objects in this MIB.
It is recommended that the implementers consider the security
features as provided by the SNMPv3 framework. Specifically, the use
of the User-based Security Model RFC 2574 [RFC2574] and the View-
based Access Control Model RFC 2575 [RFC2575] is recommended.
It is then a customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly
configured to give access to the objects only to those principals
(users) that have legitimate rights to indeed GET or SET
(change/create/delete) them.
Pate, et al. Standards Track [Page 34]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
7. Authors' Addresses
Prayson Pate
Overture Networks
P. O. Box 14864
RTP, NC, USA 27709
Phone: +1 919 558 2200
EMail: prayson.pate@overturenetworks.com
Bob Lynch
Overture Networks
P. O. Box 14864
RTP, NC, USA 27709
Phone: +1 919 558-2200
EMail: bob.lynch@overturenetworks.com
Kenneth Rehbehn
Megisto Systems, Inc.
20251 Century Boulevard
Germantown, MD, USA 20874
Phone: +1 301 529-4427
EMail: krehbehn@megisto.com
Pate, et al. Standards Track [Page 35]
RFC 3020 MIB for FRF.16 UNI/NNI MFR December 2000
8. Full Copyright Statement
Copyright (C) The Internet Society (2000). All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Pate, et al. Standards Track [Page 36]
RFC, FYI, BCP