Home   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Presence Information Data Format (PIDF) Extension for Partial Presence :: RFC5262








Network Working Group                                        M. Lonnfors
Request for Comments: 5262                                         Nokia
Category: Standards Track                                    E. Leppanen
                                                              Individual
                                                            H. Khartabil
                                                      Ericsson Australia
                                                           J. Urpalainen
                                                                   Nokia
                                                          September 2008


 Presence Information Data Format (PIDF) Extension for Partial Presence

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Abstract

   The Presence Information Document Format (PIDF) specifies the
   baseline XML-based format for describing presence information.  One
   of the characteristics of the PIDF is that the document always needs
   to carry all presence information available for the presentity.  In
   some environments where low bandwidth and high latency links can
   exist, it is often beneficial to limit the amount of transported
   information over the network.  This document introduces a new MIME
   type that enables transporting of either only the changed parts or
   the full PIDF-based presence information.



















Lonnfors, et al.            Standards Track                     [Page 1]

RFC 5262                      Partial PIDF                September 2008


Table of Contents

   1. Introduction ....................................................2
   2. Conventions .....................................................3
   3. Structure of PIDF Diff Documents ................................3
      3.1. 'version' Attribute ........................................4
      3.2. 'entity' Attribute .........................................4
   4. Usage of 'application/pidf-diff+xml' ............................4
   5. IANA Considerations .............................................5
      5.1. URN Sub-Namespace Registration for
           'urn:ietf:params:xml:ns:pidf-diff' .........................5
      5.2. application/pidf-diff+xml MIME Type ........................6
      5.3. XML Schema Registration ....................................7
   6. Examples ........................................................8
   7. XML Schema .....................................................11
   8. Interoperability Considerations ................................12
   9. Security Considerations ........................................13
   10. Internationalization Considerations ...........................13
   11. Error Handling ................................................13
   12. Acknowledgments ...............................................13
   13. References ....................................................13
      13.1. Normative references .....................................13
      13.2. Informative references ...................................14

1.  Introduction

   The Presence Information Document Format (PIDF) [RFC3863] specifies
   the baseline XML-based format for describing presence information.
   One of the characteristics of the PIDF is that the document always
   needs to carry all presence information available for the presentity.
   In some environments where low bandwidth and high latency links can
   exist, it is often beneficial to limit the amount of transported
   information over the network.

   This document introduces a new MIME-Type 'application/pidf-diff+xml',
   which enables transporting of either only the changed parts or the
   full PIDF based presence information.  The root element of the
   document distinguishes whether the partial or full PIDF document
   content was transported.

      Note: With this new MIME-Type, applications can easily negotiate
      the support of partial updates of presence by using the Accept
      header.  If PIDF had initially been designed for partial updates,
      a new separate MIME-Type would have been unnecessary.







Lonnfors, et al.            Standards Track                     [Page 2]

RFC 5262                      Partial PIDF                September 2008


2.  Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119] and
   indicate requirement levels for compliant implementations.

   This memo makes use of the vocabulary defined in RFC 2778 [RFC2778].
   In addition, the following terms are defined:

   Full presence document:  A presence document that contains all the
      presentity's presence information that is available to a
      particular watcher.

   Partial presence document:  A presence document that represents a
      fragment of the full presence document.  A partial presence
      document can only be understood in the context of the full
      presence document, i.e., a partial presence document modifies a
      cached copy of the full presence document.

3.  Structure of PIDF Diff Documents

   The MIME type 'application/pidf-diff+xml' defines the new content
   type for partial PIDF documents.

   The XML Schema imports the PIDF [RFC3863] schema so that the full
   PIDF document content with the addition of a 'version' attribute can
   be transported.  The root element of the document is then
   , and the 'version' attribute information can be included
   within it.  Otherwise, the content of  element is exactly
   the same as what would have been if 'application/pidf+xml' content
   type had been used.  Although the XML Schema also allows using
    as the document root element, it is disallowed from
   applications utilizing this document format.

   When only the changes of the presence document are transported, the
   model described in XML patch operations [RFC5261] is used.  The root
   element of the document is then .  The patch operation
   elements: , , and  allow changing the partial
   content of the cached local copy of the full presence document.  The
    element is used to add new content, the  element
   updates, and the  element removes existing content.

   The optional 'version' attribute within the two possible document
   root elements contains a sequence number which is incremented by one
   between subsequent document updates, i.e., a more recent document
   update has a higher 'version' value than the previous one.  This
   number can be used to ensure consistent updates as the recipient of



Lonnfors, et al.            Standards Track                     [Page 3]

RFC 5262                      Partial PIDF                September 2008


   the document can use the 'version' number to properly order received
   documents and to ensure that updates have not been lost.  The usage
   of this attribute thus allows "state delta" processing described in
   [RFC3265].  Partial notification [RFC5263] uses a similar model.
   This number increments independently regardless of whether the
    or the  content is transported.  In other
   words, a single version counter is maintained across  and
    documents.

   Implementations using this document format MUST follow guidelines
   specified in the PIDF [RFC3863] and PIDF extension formats, for
   example, DataModel [RFC4479], Rich Presence Information Data (RPID)
   [RFC4480], and Contact Information in PIDF (CIPID) [RFC4482] MUST
   support the usage of the XML schema data type ID
   [W3C.REC-xmlschema-2-20041028] of these listed RFCs.  Specifically,
   the XML document MUST be well formed and SHOULD be valid.  This
   specification makes use of XML namespaces for identifying presence
   documents and document fragments.  The namespace URI for elements
   defined by this specification is a URN [RFC2141], using the namespace
   identifier 'ietf' specified in RFC 2648 [RFC2648] and extended by RFC
   3688 [RFC3688].  This URN is:

   urn:ietf:params:xml:ns:pidf-diff

3.1.  'version' Attribute

   Every presence document compliant with this specification MAY contain
   a 'version' attribute within the  and  element.

3.2.  'entity' Attribute

   Every presence document compliant with this specification MAY contain
   an 'entity' attribute within the  element.  Its content, a
   presentity URI, MUST then be the same as the 'entity' attribute value
   of the  element described in [RFC3863].  The usage of this
   presentity URI is described in more detail in Section 3.1 of
   [RFC4479].

4.  Usage of 'application/pidf-diff+xml'

   The partial presence document SHOULD only contain those elements or
   attributes that have changed.  However, when there are a lot of
   changes, the full presence document content can then be transported
   instead.







Lonnfors, et al.            Standards Track                     [Page 4]

RFC 5262                      Partial PIDF                September 2008


5.  IANA Considerations

   IANA has performed the following actions:

   o  registered a new XML namespace URN per [RFC3688].

   o  registered a new MIME type 'application/pidf-diff+xml' according
      to the procedures of RFC 4288 [RFC4288] and guidelines in RFC 3023
      [RFC3023].

   o  registered a new XML Schema according to the procedures of RFC
      3688 [RFC3688].

5.1.  URN Sub-Namespace Registration for
      'urn:ietf:params:xml:ns:pidf-diff'

   This specification registers a new XML namespace, as per the
   guidelines in RFC 3688 [RFC3688].

      URI:
      urn:ietf:params:xml:ns:pidf-diff

      Description:
      This is the XML namespace for XML elements defined by RFC 5262 to
      describe the 'application/pidf-diff+xml' content type for partial
      PIDF.

      Registrant Contact:
      IETF, SIMPLE working group, (simple@ietf.org)
      Jari Urpalainen, (jari.urpalainen@nokia.com)





















Lonnfors, et al.            Standards Track                     [Page 5]

RFC 5262                      Partial PIDF                September 2008


   XML:

   BEGIN
   
   
   
     
       
       PIDF extension for partial PIDF
     
     
       

Namespace for PIDF extension for partial notifications

urn:ietf:params:xml:ns:pidf-diff

See RFC5262.

END 5.2. application/pidf-diff+xml MIME Type MIME media type name: application MIME subtype name: pidf-diff+xml Mandatory parameters: none Optional parameters: Same as charset parameter of application/xml as specified in RFC 3023 [RFC3023]. Default value is UTF-8. Encoding considerations: Same as encoding considerations of application/xml as specified in RFC 3023 [RFC3023]. Security considerations: See Section 10 of RFC 3023 [RFC3023]. This content type is designed to carry presence data, which may be considered private information. Appropriate precautions should be adopted to limit disclosure of this information. Interoperability considerations: none Published specification: RFC 5262 Lonnfors, et al. Standards Track [Page 6] RFC 5262 Partial PIDF September 2008 Applications that use this media type: SIP-based presence systems Additional information: Magic Number: None File Extension: .xml Macintosh file type code: "TEXT" Personal and email address for further information: Jari Urpalainen, jari.urpalainen@nokia.com Intended usage: LIMITED USE Restrictions on usage: Presence [RFC3863] based systems. Author: This specification is a work item of the IETF SIMPLE working group, with mailing list address . Author/Change controller: the IETF. 5.3. XML Schema Registration This section calls for IANA to register a new XML Schema, the sole content of which can be found in Section 7. URI: urn:ietf:params:xml:schema:pidf-diff Registrant Contact: IETF, SIMPLE working group, Jari Urpalainen, Lonnfors, et al. Standards Track [Page 7] RFC 5262 Partial PIDF September 2008 6. Examples An 'application/pidf-diff+xml' document that contains the full state presence information: open true true false tel:09012345678 open im:pep@example.com closed http://example.com/~pep/ http://example.com/~pep/icon.gif http://example.com/~pep/card.vcd sip:pep@example.com Full state presence document Lonnfors, et al. Standards Track [Page 8] RFC 5262 Partial PIDF September 2008 urn:esn:600b40c7 An example partial update document with the root element: open mailto:pep@example.com This is a new tuple inserted between the last tuple and person element open 0.7 Lonnfors, et al. Standards Track [Page 9] RFC 5262 Partial PIDF September 2008 An updated local composition presence document after applying the patches: open true true false tel:09012345678 open im:pep@example.com open http://example.com/~pep/ http://example.com/~pep/icon.gif http://example.com/~pep/card.vcd sip:pep@example.com open mailto:pep@example.com Lonnfors, et al. Standards Track [Page 10] RFC 5262 Partial PIDF September 2008 This is a new tuple inserted between the last tuple and note element Full state presence document urn:esn:600b40c7 7. XML Schema The XML schema for the 'application/pidf-diff+xml' data format. The included schema "urn:ietf:params:xml:schema:xml-patch-ops" is defined in [RFC5261], and the PIDF Schema "pidf.xsd" is imported from [RFC3863]. Lonnfors, et al. Standards Track [Page 11] RFC 5262 Partial PIDF September 2008 8. Interoperability Considerations Systems compliant with Common Profile for Presence (CPP) [RFC3859] will not be by default able to use this specification. However, this will not cause any interoperability problems because all endpoints and gateways must support the default MIME type (application/pidf+xml) regardless of if they support this specification. Thus, if a gateway or another end point does not understand this specification it will not be used. In SIMPLE-based systems, use of this MIME type is negotiated using SIP content type negotiation mechanism as specified in partial notification [RFC5263]. Other CPP-compliant (other than SIP-based) systems can also support this specification if they have a mechanism to indicate support for it. If they do, it is possible to build a gateway that will preserve end-to-end integrity with usage of partial PIDF. Lonnfors, et al. Standards Track [Page 12] RFC 5262 Partial PIDF September 2008 9. Security Considerations All security considerations identified for PIDF [RFC3863] apply unchanged for this document as presence information may contain highly sensitive information. Furthermore, the protocol SHOULD provide authorization policies what presence information can be given to which watchers, and when, see [RFC5025]. 10. Internationalization Considerations The PIDF [RFC3863] format is represented in XML that performs all character processing in terms of the Universal Character Set (UCS). Conformant XML processors MUST support both UTF-8 and UTF-16 encodings of the UCS. UTF-8 is the RECOMMENDED encoding of this partial presence format. If the character set of the initial document has been accepted by a receiving application, it MUST continue to accept the same character set with the subsequent documents. However, it MUST NOT need to accept a possible character set change. 11. Error Handling Error conditions MAY be indicated by errors defined in [RFC5261]. This document doesn't define any additional error elements. If the 'version' or 'entity' attributes have incorrect content, it MAY be indicated by the error element. 12. Acknowledgments The authors would like to thank Jose Costa-Requena, Jyrki Aarnos, Jonathan Rosenberg, Dean Willis, Miguel Garcia, Krisztian Kiss, Ben Cambell, Robert Sparks, Anders Kristenssen, Aki Niemi, Jon Peterson, Gonzalo Camarillo, Lars Eggert, Lakshminath Dondeti, and Chris Newman for their valuable comments and contributions. 13. References 13.1. Normative references [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3863] Sugano, H., Fujimoto, S., Klyne, G., Bateman, A., Carr, W., and J. Peterson, "Presence Information Data Format (PIDF)", RFC 3863, August 2004. Lonnfors, et al. Standards Track [Page 13] RFC 5262 Partial PIDF September 2008 [RFC2141] Moats, R., "URN Syntax", RFC 2141, May 1997. [RFC2648] Moats, R., "A URN Namespace for IETF Documents", RFC 2648, August 1999. [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January 2004. [RFC3023] Murata, M., St. Laurent, S., and D. Kohn, "XML Media Types", RFC 3023, January 2001. [RFC4288] Freed, N. and J. Klensin, "Media Type Specifications and Registration Procedures", BCP 13, RFC 4288, December 2005. [RFC4479] Rosenberg, J., "A Data Model for Presence", RFC 4479, July 2006. [RFC4480] Schulzrinne, H., Gurbani, V., Kyzivat, P., and J. Rosenberg, "RPID: Rich Presence Extensions to the Presence Information Data Format (PIDF)", RFC 4480, July 2006. [RFC4482] Schulzrinne, H., "CIPID: Contact Information for the Presence Information Data Format", RFC 4482, July 2006. [RFC5261] Urpalainen, J., "An Extensible Markup Language (XML) Patch Operations Framework Utilizing XML Path Language (XPath) Selectors", RFC 5261, September 2008. [W3C.REC-xmlschema-2-20041028] Malhotra, A. and P. Biron, "XML Schema Part 2: Datatypes Second Edition", World Wide Web Consortium Recommendation REC-xmlschema-2-20041028, October 2004, . 13.2. Informative references [RFC2778] Day, M., Rosenberg, J., and H. Sugano, "A Model for Presence and Instant Messaging", RFC 2778, February 2000. [RFC3265] Roach, A., "Session Initiation Protocol (SIP)-Specific Event Notification", RFC 3265, June 2002. [RFC3859] Peterson, J., "Common Profile for Presence (CPP)", RFC 3859, August 2004. [RFC5025] Rosenberg, J., "Presence Authorization Rules", RFC 5025, December 2007. Lonnfors, et al. Standards Track [Page 14] RFC 5262 Partial PIDF September 2008 [RFC5263] Lonnfors, M., "Session Initiation Protocol (SIP) Extension for Partial Notification of Presence Information", RFC 5263, September 2008. Authors' Addresses Mikko Lonnfors Nokia Itamerenkatu 11-13 00180 Helsinki Finland Phone: +358 71 8008000 EMail: mikko.lonnfors@nokia.com Eva Leppanen Individual Lempaala Finland EMail: eva.leppanen@saunalahti.fi Hisham Khartabil Ericsson Australia P.O. Box 256c Melbourne, VIC 3001 Australia EMail: hisham.khartabil@gmail.com Jari Urpalainen Nokia Itamerenkatu 11-13 00180 Helsinki Finland Phone: +358 7180 37686 EMail: jari.urpalainen@nokia.com Lonnfors, et al. Standards Track [Page 15] RFC 5262 Partial PIDF September 2008 Full Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Lonnfors, et al. Standards Track [Page 16]

 

RFC, FYI, BCP